MX-B382/SC Operation-Manual Start-Guide GB - Sharp

More documents

Recommendations

Info

SUPPLIES Standard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. GENUINE SUPPLIES Storage of supplies Proper storage 1. Store the supplies in a location that is: clean and dry at normal temperature with minimal temperature fluctuations not exposed to direct sunlight 2. Store paper in the wrapper and lying flat. 3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misfeeds. Storing toner cartridges Store the box that contains the toner cartridge horizontally; do not store it standing up. If the toner cartridge is stored standing up, the toner may solidify inside the cartridge. Store the toner in a location that is cooler than 104°F (40°C). Storage in a hot location may cause the toner in the cartridge to solidify. Staple cartridge The finisher requires the following staple cartridge: MX-SCX1 (for finisher) Approx. 5000 per cartridge x 3 cartridges Supply of spare parts and consumables The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too, are available for 7 years following the termination of production. 38 For best copying results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp products. Look for the Genuine Supplies label on the toner package.
SPECIFICATIONS Machine specifications / copier specifications Name Digital Multifunctional System MX-B382/MX-B382SC Type Desktop Display 7 inch colour touch panel LCD Photoconductive type OPC drum Printing method Electrophotographic system (laser) Developer system Dry-type two-component magnetic brush development Fusing system Heat rollers Scanning resolution Document glass Automatic document feeder Copying resolution 600 x 600 dpi Scanning gradation 10 bits Printing gradation Equivalent to 256 levels Original sizes / types (Document Glass) Copy sizes Print margins Black and white scanning: 600 x 300 dpi 600 x 600 dpi (factory default values) Colour scanning: 600 x 300 dpi 600 x 600 dpi (factory default values) Black and white scanning: 600 x 300 dpi (factory default values) 600 x 600 dpi Colour scanning: 600 x 300 dpi (factory default values) 600 x 600 dpi Max. A4 (8-1/2" x 11") / sheets, bound documents Maximum: A4 (8-1/2" x 11") Minimum: A5 (5-1/4" x 5-3/4") Leading edge / trailing edge: total 8 mm (21/64") or less, near edge / far edge: total 8 mm (21/64") or less 39
Page 1 and 2: DIGITAL MULTIFUNCTIONAL SYSTEM STAR
Page 3 and 4: For the users of the fax function F
Page 5 and 6: Note: The explanations in this manu
Page 7 and 8: Installation notes Do not install t
Page 9 and 10: Handling precautions Do not place a
Page 11 and 12: OPERATION MANUALS AND HOW TO USE TH
Page 13 and 14: ACCESSING THE WEB SERVER IN THE MAC
Page 15 and 16: PART NAMES AND FUNCTIONS (14) (1) (
Page 17 and 18: OPERATION PANEL Image send indicato
Page 19 and 20: TURNING THE POWER ON AND OFF The ma
Page 21 and 22: PLACING ORIGINALS Using the documen
Page 23 and 24: LOADING PAPER IN A TRAY Loading pap
Page 25 and 26: BEFORE INSTALLING THE SOFTWARE This
Page 27 and 28: BEFORE INSTALLING THE SOFTWARE Disc
Page 29 and 30: BEFORE INSTALLING THE SOFTWARE For
Page 31 and 32: SETUP IN A WINDOWS ENVIRONMENT This
Page 33 and 34: SETUP IN A WINDOWS ENVIRONMENT INST
Page 35 and 36: SETUP IN A WINDOWS ENVIRONMENT When
Page 37 and 38: SETUP IN A WINDOWS ENVIRONMENT If y
Page 39: REGULAR MAINTENANCE To ensure that
Page 43 and 44: Machine specifications / copier spe
Page 45 and 46: Ambient environment (Humidity) 85%
Page 47 and 48: Automatic document feeder specifica
Page 49 and 50: Administrator Name: Contact at: ✂
Page 51 and 52: TO THE ADMINISTRATOR OF THE MACHINE
Page 55 and 56: SHARP ELECTRONICS (Europe) GmbH Son

MX-B382/SC Operation-Manual Start-Guide GB - Sharp

Create successful ePaper yourself

Delete template?

Save as template?