Revised Specifications - the Public Building Commission of Chicago

PBC Control Rev: 1_09/07/09 PD
Project Rev C_07/02/10
1.5 DELIVERY, STORAGE, AND HANDLING
A. Prepare valves for shipping as follows:
1. Protect internal parts against rust and corrosion.
2. Protect threads, flange faces, grooves, and weld ends.
3. Set globe and gate valves closed to prevent rattling.
4. Set ball and plug valves open to minimize exposure of functional surfaces.
5. Set butterfly valves closed or slightly open.
6. Block check valves in either closed or open position.
B. Use the following precautions during storage:
1. Maintain valve end protection.
2. Store indoors and maintain valve temperature higher than ambient dew-point
temperature. If outdoor storage is necessary, store valves off the ground in
watertight enclosures.
C. Use a sling to handle large valves. Rig to avoid damage to exposed parts. Do not use
handwheels and stems as lifting or rigging points.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
1. Gate Valves:
a. Crane Company; Valves and Fitting Division.
b. Milwaukee Valve Company, Inc.
c. NIBCO Inc.
d. Henry Pratt Company.
2. Ball Valves:
a. Conbraco Industries, in Milwaukee
b. Valve Company, Inc.
c. NIBCO Inc.
d. Crane Company
3. Plug Valves:
a. Grinnell Corp.
b. NIBCO Inc.
c. Crane Company
d. Victaulic Company of America.
4. Butterfly Valves:
a. Henry Pratt Company
b. Keystone Valve USA, Inc.
c. Milwaukee Valve Company, Inc.
CHICAGO POLICE DEPARTMENT
12 TH DISTRICT POLICE STATION 15100 -2 VALVES
PBC-PROJECT# 09070