You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BAS<br />
In-Ceiling Bass Augmentation System<br />
The 8-inch In-Ceiling Bass Augmentation System enhances the low-frequency response of any in-ceiling or in-wall<br />
speaker system; this is particularly effective in large rooms.<br />
The BAS systems have built-in stereo crossovers. This allows you to connect your in-ceiling or in-wall left and right<br />
speakers to the BAS, which will direct the higher frequencies to your other (satellite) speakers while the BAS handles<br />
the lower frequencies.<br />
By selecting one of the three frequency settings, you can control the amount of bass that is sent to the BAS. For<br />
instance, if you have small speakers, you would set the switch to a high frequency. This will allow your small speakers to<br />
play effortlessly, hence, sound better with less distortion. If you have larger speakers, you would set the switch to a low<br />
frequency, allowing your larger speakers to reproduce the midbass and the BAS to play only the low, or sub-bass. This<br />
will produce tighter and deeper bass response.<br />
No matter how you configure the BAS with any speaker system, you will get greater saturation, higher SPL, and less<br />
distortion.<br />
The BAS augmentation system just makes your system sound better.<br />
8.2BAS<br />
Order Stock # ASM90920<br />
• 8" IMG Cone, Dual Voice Coil Woofer<br />
• Front-Mounted Adjustable Low-Pass Crossover, 80Hz or 120Hz<br />
• Front-Mounted 180˚ Phase Reversal Switch<br />
• Front-Mounted 180˚ Phase Reversal Switch<br />
• Recommended Amplifier - Bass Power 200<br />
Sensitivity: 90dB 1W/1m<br />
Power Handling: 100 Watts<br />
Impedance: 8 Ohms<br />
Frequency Response: 30Hz - 120Hz or 30Hz - 80Hz, Depending on Switch Setting<br />
Diameter x Depth: 11 15 ⁄16" x 4 1 ⁄4" (303 mm x 108 mm)<br />
Cut-Out Diameter: 9 3 ⁄4" (248 mm)<br />
Weight: 6.4 lbs. (2.9 kg)
Change language