Extreme Networks Summit WM-Series Wireless Controller - Wavelink

More documents

Recommendations

Info

Filtering 1. From the WM-AD Configuration menu select the Filtering tab. 2. Select Default from the Filter ID drop down box. Select all 3 options, In, Out and Allow. Leave the IP:Port as *.*.*.*. 3. Select Non-Authenticated in the Filter ID drop down box. Select all 3 options, In, Out and Allow. Leave the IP:Port as *.*.*.*. 4. Save the settings using the Save button. A more secure setup for this topology might be: Allow 192.168.121.* UDP Allow 192.168.110.* UDP Allow 192.168.123.* UDP Disallow *.*.*.* N/A T Copyright © 2006 SpectraLink Corporation. All rights reserved. PN: 72-9958-00-A.doc Page 10
Multicast Configuration 1. From the WM-AD Configuration menu, select the Multicast tab. 2. Select the Enable Multicast Support check box. 3. In the Defined Group dropdown field, select or enter Spectralink SVP (224.0.1.116) and click the Add button. 4. Enable Wireless Replication for the multicast selection by selecting the checkbox for the entry. 5. Save the settings using the Save button. Copyright © 2006 SpectraLink Corporation. All rights reserved. PN: 72-9958-00-A.doc Page 11
Page 1 and 2: Extreme Networks Summit WM-Series W
Page 3 and 4: Product Limitations 1. Beacons are
Page 5 and 6: Copyright © 2006 SpectraLink Corpo
Page 7 and 8: WAP Registration 1. Navigate to the
Page 9: Setting up SSID, Security and QOS 1
Page 13 and 14: Quality of Service 1. From the WM-A
Page 15 and 16: Wireless APs Address Assignment 1.
Page 17 and 18: 802.11b/g Settings 1. In the Altitu

Extreme Networks Summit WM-Series Wireless Controller - Wavelink

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?