[MI 019-100] Universal Instruction Manual I/A Series Mass Flow ...

More documents

Recommendations

Info

MI 019-100 – December 2003 3. Start Up Procedure Using Keypad/Display Operation is accomplished via four multi-function keys. They operate as shown in Table 9. Key Left Arrow (ESC) Right Arrow (ENTER) Up Arrow (BACK) Down Arrow (NEXT) Table 9. Operation of Function Keys Function Moves left in the menu structure. Moves the cursor to the left in a data entry field. Escapes from changes in a picklist menu or data entry.* Answers No. Moves right in the menu structure. Used to access the data entry edit mode of a parameter. Moves the cursor to the right in a data entry field. Enters and saves the changed menu picklist choices or data entry.* Answers Yes. Moves upward in the menu structure or a picklist menu. Moves downward in the menu structure or a picklist menu. *On data entry, repeatedly press the key until the cursor reaches the end of the display. The Keypad/Display Quick Start menu is shown in Figure 19. 1. Press the Left arrow key until the display reads 1 MEASURE and follow the menu using the keys as explained in Table 9. 2. Go to 3 FC1, press the Enter key to access edit mode, and enter your first flow constant. Then enter the others. 3. Go to 3 DC1, press the Enter key to access edit mode, and enter your first density constant. Then enter the others. 4. Apply flow to your flowmeter for 5 to 10 minutes. 5. Create zero flow by closing block valves to ensure no fluid movement. 6. Go to 3SETZERO. Press the Enter key to start the zeroing process. The display reads BUSY until the process is finished and then reads DONE. Press the Down arrow key to display the new zero value (3 VALUE). You can then change that value using the Left/Right and Up/Down arrow keys as explained in Table 9. Alternatively, you can press the Down arrow key to display RESTORE. Pressing the Enter key at this point restores the factory default zero value. 7. Go to 2 MA URV and enter your upper range value. 8. Go to 2 MA LRV and enter your lower range value. 9. Go to 2 FLOWCON. Press the Left arrow key to go to ONLINE. Pressing the Enter key to answer Yes takes you to 1 QSTART. Press the Up arrow key to go to 1 MEASURE and the Left arrow key to return to Measure mode. 26
3. Start Up MI 019-100 – December 2003 1MEASURE 1 QSTART PASSWORD OFFLINE 2 FLOWCON 3 FC1 ONLINE 3 FC2 3 FC3 3 NOMCAP 2 DENSCON 3 DC1 3 DC2 3 DC3 3 DC4 2 FLOWZER 3 SETZERO 3 VALUE 2 MA1 URV 3 RESTORE 2 MA1 LRV Figure 19. Keypad/Display Quick Start Menu 27
Page 1 and 2: Instruction MI 019-100 December 200
Page 3 and 4: Contents Figures...................
Page 5 and 6: Figures 1 Sample CFS10 or CFS20 Mas
Page 7 and 8: Tables 1 Electrical Safety Specific
Page 9 and 10: Preface Standard documentation ship
Page 11 and 12: 1. Safety Information General Warni
Page 13 and 14: 1. Safety Information MI 019-100 -
Page 21 and 22: 2. Installation Introduction An Inv
Page 23 and 24: 2. Installation MI 019-100 - Decemb
Page 35: 3. Start Up CFT50/CFS10 or CFT50/CF
Page 39 and 40: Index C CFS10 or CFS20 Flowtubes Mo

[MI 019-100] Universal Instruction Manual I/A Series Mass Flow ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?