Installation and Start-Up Guide 11/2002 Edition

11.02 Updates/Supplements (AE1)
6 Changes to NC-SW 6.1 (10.00) vis-à-vis SW 6.3 (11.01) and HMI-SW 6.1 vis-à-vis SW 6.2
No. Topic: HMI SW 6.2 Target document(s)
63_33 Network boot PCU50 IAM, IM4: Installation and Start-Up Guide
HMI/MMC
63_34 Step7 installation directory,
optional
IAM, IM4: Installation and Start-Up Guide
HMI/MMC
63_35 PCMCIA cards and SW IAM, IM4: Installation and Start-Up Guide
HMI/MMC
63_36 Diameter symbol for transverse
axes
BAD: Operator's Guide, HMI Advanced 2.5.1
BEM: Operator's Guide, HMI Embedded 2.5.1
63_37 Multi-block display with Extcall BAD: Operator's Guide, HMI Advanced 4.6.5
BEM: Operator's Guide, HMI Embedded 4.6.1,
6.11
IAM/IM2: Start-Up HMI Embedded 3.5
63_38 Inclusion of wear EC/SC BAD: Operator's Guide, HMI Advanced 5.3.3
63_39 Extension of tool types BAD: Operator's Guide, HMI Advanced 5.1
63_40 Extended display for grinding
tools
BAD: Operator's Guide, HMI Advanced 5.3.4
IAM, IM4: Start-Up HMI Advanced 5.6.12
63_41 Relocate tools, old location as BAD: Operator's Guide, HMI Advanced 5.3.5
default
63_42 Polar coordinates for contour BAD: Operator's Guide, HMI Advanced 6.5.6
prog.
63_43 Undercut BAD: Operator's Guide, HMI Advanced 6.5.7
63_44 Settable access rights for part IAM, IM4: Start-Up HMI Advanced 4.3.2, 5.6.8
program creation
63_45 Secured communication protocol BAD: Operator's Guide, HMI Advanced 7.4
IAM, IM4: Start-Up HMI Advanced 5.6.6
63_46 Storable RS232C interface BAD: Operator's Guide, HMI Advanced 7.5.2
parameters
63_47 Softkey layout for network drives BAD: Operator's Guide, HMI Advanced 4.6.4, 4.6.6
IAM, IM4: Start-Up HMI Advanced 5.4
BEM: Operator's Guide, HMI Embedded 6.3
IAM, IM2: Start-Up HMI Embedded 5.26
63_48 Channel display selection by PLC IAM, IM4: Start-Up HMI Advanced 5.1.15, 5.1.18
63_49 Status display selection in IAM, IM4: Start-Up HMI Advanced 5.1.15
operating screens
63_50 Provide HMI task number for PLC IAM, IM4: Start-Up HMI Advanced 5.1.4
63_51 Mouse operation with HMI
Embedded Win 32
BEM: Operator's Guide, HMI Embedded 2.1.7
IAM, IM2: Start-Up HMI Embedded 5.27
63_52 ATA card as logical drive BEM: Operator's Guide, HMI Embedded 6.10, 9.8
IAM, IM2: Start-Up HMI Embedded 8.5
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D HMI/MMC Installation and Start-Up Guide (IAM) – 11.02 Edition AE1/6-31