Installation and Start-Up Guide 11/2002 Edition

Starting Up HMI Advanced (IM4) 11.02
3 Communication / Basic Conditions
Main
menu
Function
7 4 Partition Backup/Restore With Ghost: Partition content of C:, E:, F: to
D: or restore data from D: back to C:, E:, F: .
1 Configure GHOST Parameters
1 Change Maximum Backup Images
2 Define Emergency Backup Image
9 Back to Previous Menu
2 Partition Backup, LOCAL Mode
3 Partition Restore, LOCAL Mode
4 Partition E (Windows) Restore, LOCAL Mode
8 Delete Image
9 Back to Previous Menu
9 Return to Main Menu: Go back to main menu
8 Start PC Link: Install SW using a CD-ROM (Interlink/Interserve)
9 Reboot: Restart system
Configuring the Service menu
The items in the Service menu can be configured as follows:
Show/Hide [a]
Use special product designation (instead of SINUMERIK) [b]
Modify text [c]
For the purposes of configuration, the file envparam.bat must be saved to partition
C: Tools directory and assigned the following commands:
Entry
no.
DOS command
Text/Function, if
=True
1 [a] set _INSTALL 1 Install/Update SINUMERIK
System
2 [a] set _TOOLS 2 SINUMERIK Tools and
Options
4 [a] set _SERVICE 4 Start Windows (Service
Mode)
6 [a] set _REBOOT 6 Reboot System (Warm
Boot)
[a] set _HMI Show submenu with HMI
functions
String entries:
Text/Function,
if
=False
No display
No display
No display
No display
No display
Default
True
True
True
False
True
9 [c] set _ENDTXT =String Reboot (Warm
Boot)
[b] set
_PRODUCTLINE
=String
SINUMERIK
IM4/3-24
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D HMI/MMC Installation and Start-Up Guide (IAM) – 11.02 Edition