You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. Installation, connection and commissioning<br />
If you are familiar with the configuration of Modbus/RTU<br />
networks, you can carry out the connection of the<br />
<strong>COM462RTU</strong> by yourself. Otherwise please contact<br />
your EDP administrator!<br />
4.1 Preliminary considerations<br />
1. Have all the questions as regards the installation been answered by the<br />
technician responsible for the installation<br />
2. The device is operated on the internal bus. Is the BMS address to be set<br />
known<br />
If, apart from the <strong>COM462RTU</strong>, an alarm indicator and test combination<br />
MK800 is connected to the internal bus, the <strong>COM462RTU</strong> must not<br />
have the address 1 (master).<br />
You will find more detailed information on the BMS topic, in particular<br />
about the wiring of bus devices, in the separate document "BMS bus".<br />
You can download the document from the download area of the website<br />
www.bender-de.com.<br />
3. Is the Modbus/RTU address to be set known<br />
<strong>COM462RTU</strong>_D00010_00_M_XXEN/07.2013<br />
13