Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

More documents

Recommendations

Info

® 2 41457-01 7/2000
® CONGRATULATIONS! Your new Hunter ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, record the following information for your records and warranty assistance. Please refer to the carton and the Hunter nameplate (located on top outside fan motor housing) for the proper information. Model Name __________________ Catalog No. ___________________ Serial No. _____________________ Date Purchased ________________ Where Purchased ______________ _____________________________ Please attach your Hardware Sheet and Exploded View Sheet to this manual for future reference. Attach Your Receipt or a Copy of Your Receipt Here 41457-01 7/2000 © 2000 Hunter Fan Co. 7/2000 3
Page 1: ® ® SINCE 1886 Installation and O
Page 5 and 6: ® IMPORTANT INFORMATION CAUTIONS
Page 7 and 8: ® INSTALLER’S CHOICE® This pate
Page 9 and 10: ® 5. Place a flat washer on each o
Page 11 and 12: ® 5. Carefully loosen and remove t
Page 13 and 14: ® 3. Position the slots in the ass
Page 15 and 16: ® STEP 6 - INSTALLING THE REMOTE R
Page 17 and 18: ® 2. Make wiring connections using
Page 19 and 20: ® Wall Switch Wire For Separate Co
Page 21 and 22: ® STEP 9 - ASSEMBLING FAN BLADES H
Page 23 and 24: ® STEP 10 - ATTACHING THE SWITCH H
Page 25 and 26: ® If your fan has a lower switch h
Page 27 and 28: ® Lower Switch Housing Switch Hous
Page 29 and 30: ® INSTALLING SINGLE-GLOBE FIXTURE
Page 31 and 32: ® OPERATING YOUR HUNTER FAN WITH A
Page 33 and 34: TROUBLESHOOTING PROBLEM PROBABLE CA
Page 35: ® PROBLEM PROBABLE CAUSE SOLUTION

Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

Create successful ePaper yourself

Delete template?

Save as template?