TD-W8961ND Wireless N ADSL2+ Modem Router - Mondo Plast

TD-W8961ND Wireless N ADSL2+ Modem Router User Guide
Chapter 2 Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs locate on the front panel, they indicate the device’s working status. For details, please
refer to LED Explanation.
LED Explanation:
Name Status Indication
Power
ADSL
Internet
WLAN
LAN(1-4)
QSS
On
Off
Flash
On
Off
Off
On
Flash
On
Flash
Off
Flash
On
Off
Slow Flash
On
Quick Flash
Power is on.
Power is off.
The ADSL negotiation is in progress.
The LINE port is linked up.
The LINE port is linked down.
There is no successful PPP connection or the Router works on Bridge
mode.
A successful PPP connection has been built.
Data is being transferred over the Internet.
The wireless function is enabled but no data is being transmitted.
There is wireless data being transmitted.
The wireless function is disabled.
Data is being transferred over the 1-4 (LAN) port.
There is a successful connection on the corresponding 1-4 (LAN)
port but no activity.
There is no connection on the corresponding 1-4 (LAN) port or the
connection is abnormal.
A wireless device is connecting to the network by QSS function. This
process will last in the first 2 minutes.
A wireless device has been successfully added to the network by QSS
function.
A wireless device failed to be added to the network by QSS function.
4