TD-W8961ND Wireless N ADSL2+ Modem Router - Mondo Plast

TD-W8961ND Wireless N ADSL2+ Modem Router User Guide
Router’s SSID, keep the default setting. If you don’t want to broadcast the Router’s SSID,
select “No”.
• Use QSS: Use QSS (Wi-Fi Protected Setup) function, you can add a new wireless
device to an existing network quickly. To Use QSS, keep the default setting, and
configure the parameters in QSS Settings. If you don’t want to Use QSS, select “No”,
then you will see the screen as shown below.
Figure 4-15
• SSID: Wireless network name shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this
setting is the same for all stations in your wireless network. Type the desired SSID in the
space provided.
• Authentication Type: Select an authentication type from the drop-down list, which
allows you to configure security features of the wireless LAN interface. Options available
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK.
1) WEP-64Bits
To configure WPA-64Bits settings, select the WPA-64Bits option from the drop-down list. The
menu will change to offer the appropriate settings. WPA-64Bits is a data privacy mechanism
based on a 64-bit shared key algorithm, as described in the IEEE 802.11g standard.
2) WEP-128Bits
Figure 4-16
30