Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Engh Intercondylar Notch <strong>Retractor</strong>s<br />
Designed by Gerard A. Engh, MD<br />
Enhances minimally invasive exposure<br />
of the medial femoral condyle<br />
PRODUCT NO’S:<br />
3230-01 [Small]<br />
Blade Width at Teeth: 9mm<br />
Depth from Bend: 2.25"<br />
Overall Length: 8.125"<br />
3230-02 [Medium]<br />
Blade Width at Teeth: 10mm<br />
Depth from Bend: 2.25"<br />
Overall Length: 8.125"<br />
3230-03 [Large]<br />
Blade Width at Teeth: 12mm<br />
Depth from Bend: 2.25"<br />
Overall Length: 8.125"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Used for unicondylar<br />
arthroplasty<br />
Offset Osteotome – Double Bent<br />
Offset Osteotome<br />
Cement Scraper – Left<br />
Cement Scraper – Right<br />
Offset Osteotomes<br />
Designed to remove the<br />
overhanging posterior condyle<br />
or osteophytes from the back<br />
of the femoral condyle.<br />
Engh Unicondylar Minimally<br />
Invasive <strong>Knee</strong> Surgery Instruments<br />
Designed by Gerard A. Engh, MD<br />
Designed for use in unicondylar<br />
minimally invasive knee surgery<br />
Rake <strong>Retractor</strong><br />
Rake <strong>Retractor</strong><br />
Used to retract soft<br />
tissue at the joint line.<br />
Cement Scrapers<br />
Right and left design used to<br />
scrape cement from around<br />
and behind the implants.<br />
PRODUCT NO’S:<br />
4910 [Rake <strong>Retractor</strong>]<br />
Rake Head: 38mm x 25mm<br />
Overall Length: 7.5"<br />
4920-01 [Cement Scraper – Right]<br />
Scraper Head: 5mm x 9mm<br />
Overall Length: 8.5"<br />
4920-02 [Cement Scraper – Left]<br />
Scraper Head: 5mm x 9mm<br />
Overall Length: 8.5"<br />
4930-01 [Offset Osteotome]<br />
Osteotome Head: 10mm x 10mm<br />
Overall Length: 8.5"<br />
4930-02 [Offset Osteotome – Double Bent]<br />
Osteotome Head: 10mm x 10mm<br />
Overall Length: 8.5"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Double Prong Soft Tissue <strong>Retractor</strong><br />
Designed by Adolph V. Lombardi Jr., MD<br />
Designed to help retract myofascial sleeves about the hip<br />
during hip surgery and other soft tissue retraction<br />
PRODUCT NO:<br />
3233<br />
Overall Length: 8.875"<br />
Prong Separation: 1"<br />
Prong Depth: 1.125"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
18 WWW.INNOMED.NET I 1.800.548.2362 I NOVEMBER 2013