Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRODUCT NO:<br />
3011<br />
Overall Length: 13.25"<br />
Blade Depth: 4.25"<br />
Blade Width: 1"<br />
O’Reilly Dual Handle<br />
Direct Anterior <strong>Retractor</strong><br />
Designed by Michael P. O’Reilly, MD<br />
Designed for use over the anterior pelvic rim during<br />
acetabular exposure in direct anterior THA, the dual handle<br />
design allows for use in both right and left hips, as well as<br />
easy exchange of the instrument between assistants<br />
Can be used in MIS/Direct Anterior, Total Hip Arthroplasty,<br />
Posterior/Anterolateral THA, and Hemiarthroplasty.<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Mueller Style Hip Instruments<br />
Poly Cup Liner Removal Drill<br />
Designed by Keith R. Berend, MD<br />
Threaded, aggressive, drill tipped tool designed<br />
to facilitate removal of an acetabular liner<br />
When the fl at-ended drill end reaches the metal of the acetabular cup,<br />
continue drilling and the liner will become engaged in the drill fl utes<br />
and back off for removal.<br />
PRODUCT NO:<br />
6865-01 [Flat Blade Osteotome]<br />
6865-02 [Femoral Head Dislocation Lever]<br />
6865-03 [Narrow Curved Osteotome]<br />
6865-04 [Wide Curved Osteotome]<br />
6865-05 [Swan Neck Curved Gouge]<br />
5350-CB [Cross Bar]<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
PRODUCT NO:<br />
4052<br />
Overall Length: 6"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Lubahn Carpal Corkscrew<br />
Designed by John D. Lubahn, MD<br />
Designed to fi t a trapezium during basal<br />
joint arthroplasty when the bone<br />
is being removed as a unit<br />
Prototype Shown<br />
Can also be used to facilitate<br />
a proximal row carpectomy<br />
as it fi ts the scaphoid, lunate,<br />
and triquetrum<br />
May additionally be used<br />
to remove the pisiform in<br />
cases of arthritis of the pisotriquetral<br />
joint<br />
MORE<br />
New<br />
INSTRUMENTS<br />
Spine Alignment Block<br />
Designed by Jason Bernard, MB, MD, FRCS<br />
Designed to act as a right angle “set square”, using stock sterile<br />
rods, to help assess intraoperative mechanical axis of the spine<br />
Holes of 5.5mm, 6.0mm, and 6.35mm are drilled at right angles through the<br />
block on the 1cm high faces. Two sterile stock rods can be inserted into the<br />
holes to create the "set square".<br />
PRODUCT NO:<br />
1191<br />
Overall Length: 2.25"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
PRODUCT NO:<br />
5006<br />
Dimensions: 5cm x 5cm x 1cm<br />
Rod Holes: 5.5mm, 6.0mm & 6.35mm<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Wire Bender<br />
Designed to bend wire<br />
up to .062"/1.6mm<br />
PRODUCT NO:<br />
2024<br />
Overall Length: 5.5"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Weinert Elbow <strong>Retractor</strong><br />
Designed by Carl R. Weinert, MD<br />
Designed for use within the elbow joint to<br />
retract the anterior capsule, and provide full<br />
exposure of the anterior articular surface for<br />
reduction and fi xation of displaced lateral<br />
condyle fractures<br />
Small blunt tip hooks over the intact medial condyle.<br />
Namba Bone Graft Slide<br />
Designed by Robert S. Namba, MD<br />
Helps to effi ciently guide allograft<br />
material into the acetabulum<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
PRODUCT NO’S:<br />
6888<br />
Overall Length: 7.75"<br />
PRODUCT NO:<br />
4697<br />
Overall Length: 6"<br />
Blade Width: 1.5"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
For more information on these New Products, visit our website at www.innomed.net/new.htm