Knee Retractor - Innomed, Inc.

Lachiewicz-Hoover
Patella Retractor
Designed By Paul Lachiewicz, MD & Steve Hoover, MD
Helps prevent harm to the polyethylene
implant from scratches, gouges, and
bovie cautery during debridement and
removal of other components
In primary TKA, it is used after implantation of
components so the surgeon can debride the lateral
gutter of synovium and for exposure for hemostasis
laterally. Also extremely valuable for revisions in which a
well fi xed patella component is to be retained.
PRODUCT NO:
3235
Overall Length: 6.5"
Patella Pad Diameter: 1.5"
Patella Pad Thickness: .25"
PROUDLY
MADE
IN THE USA
AORI Patellar Retractor
Designed by Gerard A. Engh, MD
Designed to enhance exposure
during total knee arthroplasty
The patellar retractor has a deep basket and two rows
of teeth to grab and hold to the lateral side of the
patella. The curved handle provides a fulcrum so that the
applied force will both displace and evert the patella
from the femur. The patellar retractor is placed after
a routine midline, midvastus, or medial para patellar
surgical approach to the knee. Once the patella is
everted the patellar retractor is applied to the lateral
border of the patella.
PRODUCT NO:
4690
Overall Length: 7"
Prong Width: 10mm | 22mm Gap | 10mm
PROUDLY
MADE
IN THE USA
MIS Patella Retractor
Designed by William Robb, MD
PRODUCT NO:
3220-05
Overall Length: 9"
Patella Pad Width at Widest: 22 mm
Lower Blade Width at Widest: 16 mm
PROUDLY
MADE
IN THE USA
KNEE PRIMARY & REVISION INSTRUMENTS I 1.800.548.2362 I FREE TRIAL ON MOST INSTRUMENTS
31