Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Burnishing Ends<br />
Left Turn Ends<br />
Set drill to<br />
REVERSE<br />
Set drill to<br />
REVERSE<br />
Screw Extractor Set<br />
Designed to help remove screws<br />
with stripped or damaged heads<br />
Extractors must be used with drill in reverse.<br />
Screw head is reamed with burnishing end, and<br />
is then removed with the left turn thread end.<br />
Care must be taken to burnish no more than<br />
1/16" (1.5mm) deep, as burnishing too deep<br />
can weaken the screw head.<br />
PRODUCT NO:<br />
7250-00 [Set with Case]<br />
7250-01 [Small]<br />
Overall Length: 6"<br />
7250-02 [Medium]<br />
Overall Length: 6"<br />
7250-03 [Large]<br />
Overall Length: 6"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Burnishing end<br />
Left turn<br />
thread end<br />
Screw/Pin Removal Locking Pliers<br />
Unique jaw designed to solidly grip and clamp onto screw for removal<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
PRODUCT NO:<br />
S0142<br />
Overall Length: 8"<br />
Jaw Width: 4.5mm<br />
Screw Removal Pliers<br />
Jaw designed to grasp onto a screw or screw head to help in removal<br />
PRODUCT NO:<br />
2020<br />
Overall Length: 8<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
KNEE PRIMARY & REVISION INSTRUMENTS I 1.800.548.2362 I FREE TRIAL ON MOST INSTRUMENTS<br />
49
Change language