Knee Retractor - Innomed, Inc.

Bicos Meniscal Repair Retractor Designed by James Bicos, MD
A popliteal retractor specifi cally designed for
meniscal repair or access to the posterior knee
Used when an inside out meniscal repair is indicated, the design facilitates
retracting the posterior soft tissues of the popliteal fossa out of the way, allowing
passage of meniscal repair needles.
The retractor's compact design facilitates a minimally invasive incision. The
unique shape helps capture the meniscal repair needles and direct them out of the
posterior incision for easy grasping and repair. Incorporates a shiny body to help
refl ect inside the posterior wound and aid in seeing and retrieving the needles.
PRODUCT NO:
2731
Overall Length: 5"
Depth: 1.625"
Diameter: 28mm
PROUDLY
MADE
IN THE USA
PRODUCT NO:
4680
Overall Length: 8"
Handle-to-bend Length: 7"
Prong Width: 7.5mm | 17mm Gap | 7.5mm
PROUDLY
MADE
IN THE USA
Cook Patellar Retractor
Designed by Marshall L. Cook, MD
Designed for patellar retraction
during ACL reconstruction using
patellar bone-tendon-bone graft
The retractor is wide with tines that are widely
spaced for better straddling the proximal patellar
pole. This gives better purchase and control of the
patella, and retracts the skin medially and laterally,
obviating the need for additional medial and
lateral skin retractor.
Lipscomb Meniscal Retractor
Designed by A. Brant Lipscomb, Jr., MD, P.A.
Designed to protect neurovascular
structures during meniscal and
extraarticular ligament repairs
PRODUCT NO:
3740
Overall Length: 9"
PROUDLY
MADE
IN THE USA
Redler ACL Guide Wire Stabilizer
Designed by M.R. Redler, MD
The conical close-ended design helps insure that the guide wire tip remains captured and helps to minimize
the chances of the guidewire slipping. The tempered nitrate coated steel head helps to minimize the risk
of metal shavings being introduced into the joint while the guide wire position is maintained.
Designed to work with all ACL instrument sets, the head of the ACL Guide Wire
Stabilizer will easily fi t through any standard arthroscopic portal.
PRODUCT NO:
5210
Overall Length: 9.5"
Handle Length: 4"
Cup Outside Diameter: 4mm
Cup Inside Diameter: 2mm
PROUDLY
MADE
IN THE USA
Designed to control the guide wire used to direct
the reaming or dilating of the tibial tunnel
32 WWW.INNOMED.NET I 1.800.548.2362 I NOVEMBER 2013