Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Knee Retractor - Innomed, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Stanton Pin Extractor<br />
Designed by John L. Stanton, MD, FACS<br />
Designed to tightly grasp and apply torque<br />
to help remove standard 1/8" (3.2mm) pins<br />
used during knee arthroplasty surgery<br />
PRODUCT NO:<br />
1892<br />
Overall Length: 5.25"<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Robb Cement Curette<br />
Designed by William Robb, MD<br />
Designed to help remove cement<br />
around a hip or knee prosthesis<br />
PRODUCT NO:<br />
5635<br />
Overall Length: 8"<br />
Freer End: 5mm<br />
Cup End: 10mm<br />
Made of Delrin<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Seachris Delrin<br />
Cement Scraper<br />
Designed by Timothy Seachris<br />
Reusable delrin scraper is designed<br />
to help remove cement around a<br />
knee or hip prosthesis<br />
PRODUCT NO:<br />
5218<br />
Overall Length: 5"<br />
Thickness: 1/8" (3.1mm)<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
Delrin Insert Pliers<br />
Designed to grasp an implant for<br />
adjustment without marring the<br />
implant surface<br />
PRODUCT NO’S:<br />
2025<br />
Overall Length: 8<br />
2025-03 [Replacement Insert]<br />
<strong>Inc</strong>ludes top and bottom delrin jaws,<br />
two screws and a hex wrench<br />
PROUDLY<br />
MADE<br />
IN THE USA<br />
40 WWW.INNOMED.NET I 1.800.548.2362 I NOVEMBER 2013