IP Camera User's Manual - Speco Technologies

Speco Technologies
84
IP Camera User’s Manual
- To clear memorize any data, move five keys to the right direction when cursor is on
each item.
Press FOCUS NEAR button when the cursor is at YES in order to clear memorized
data. Then flickered each item such as tour, preset, sector and so on is displayed on
the monitor about 2~3 seconds. After this process, the menu is returned to the
previous page.
* [PRESET CLEAR], [SECTOR CLEAR], [PRIVACY CLEAR], [PATTERN CLEAR] are
same as [TOUR CLEAR].
- To clear all data and wants returning to factory default, move five keys to the right
direction when cursor is at [LOAD OPTIMIZED DEFAULT] to enter the above page.
- Move five keys to the right or left direction in order to select YES, press FOCUS
NEAR button.
INITIALIZATION
[TOUR CLEAR]
[PRESET CLEAR]
[SECTOR CLEAR]
[PRIVACY CLEAR]
[PATTERN CLEAR]
[LOAD OPTIMIZED DEFAULT]
[PREVIOUS PAGE]
TOUR CLEAR
ARE YOU SURE? YES NO
LOAD OPTIMIZED DEFAULT
ARE YOU SURE? YES NO
- Then “ALL DATA INITIALIZING” is displayed about 5~7 seconds and then the menu is
returned to the previous page automatically.
TOUR CLEAR
ALL DATA INITIALIZING