IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Speco</strong> <strong>Technologies</strong><br />
95<br />
<strong>IP</strong> <strong>Camera</strong> User’s <strong>Manual</strong><br />
* Before activating Alarm, user must set ALARM ENABLE at DOME SET – ALARM –<br />
ENABLE (Refer to page 15)<br />
I. SECTOR SET<br />
Up to 8 programmable sectors are available with 16 characters.<br />
This feature is useful to memory the certain location such as parking zone or so on.<br />
When camera goes through this area, it shows the letter you memorized.<br />
I-1. SECTOR SET – SECTOR NO.<br />
Up to 8 programmable sectors set by the five keys are available.<br />
I-2. SECTOR SET – SECTOR ID<br />
set SECTOR ID, select up to 16 characters by using five keys to the left or right.<br />
Press ZOOM TELE button to move to the next character from the left to the right<br />
direction and ZOOM WIDE button to move to the next character from the right to left<br />
direction (Space displays when appears)<br />
I-3. SECTOR SET – SECTOR START<br />
To set SECTOR START angle, press FOCUS FAR button then move five keys to the<br />
left or right direction to set the position. To press FOCUS FAR button again is to<br />
escape.<br />
SECTOR SET<br />
SECTOR NO : 01<br />
SECTOR ID : SECTOR01□□□□□□□□<br />
SECTOR START: XXX.X.XX.X<br />
SECTOR END : XXX.X.XX.X<br />
SAVE<br />
EXIT<br />
DEFAULT SETTING<br />
Start Position<br />
End Position
Change language