IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Speco</strong> <strong>Technologies</strong><br />
C-3. PRESET – PAN: XXX.X TILT: XX.X<br />
88<br />
<strong>IP</strong> <strong>Camera</strong> User’s <strong>Manual</strong><br />
Press FOCUS FAR button in order to set preset position then, use the five keys to the<br />
position where memorized preset no. is needed. Then press FOCUS FAR button again<br />
after setting a preset location.<br />
C-4. PRESET – SAVE<br />
Move five keys to the right direction when the cursor is at SAVE and then the cursor will<br />
be located on Preset ID for the continuous preset No. setting.<br />
C-5. PRESET – EXIT<br />
To escape this page, move five keys to the right direction.<br />
D. AUTO SCAN SET<br />
AUTO SCAN SET<br />
START ANGLE :<br />
XXX.X.XX.X<br />
END ANGLE :<br />
XXX.X.XX.X<br />
DIRECTION : CW<br />
ENDLES : OFF<br />
SPEED : 10°/S<br />
DWELL TIME : 03<br />
SAVE AND EXIT<br />
D-1. AUTO SCAN- START ANGLE<br />
To set start angle, press FOCUS FAR button then move five keys to the starting angle<br />
which is needed memorized. To press FOCUS FAR button again is to escape.<br />
D-2. AUTO SCAN- END ANGLE<br />
To set end angle, press FOCUS FAR button then move five keys to the starting angle<br />
which is needed memorized. To press FOCUS FAR button again is to escape.<br />
D-3. AUTO SCAN – DIRECTION<br />
DEFAULT SETTING<br />
Auto Scan directions are available with two direction as CW or CCW by five keys to the