IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
IP Camera User's Manual - Speco Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Speco</strong> <strong>Technologies</strong><br />
H. ALARM SET<br />
patterns.<br />
94<br />
<strong>IP</strong> <strong>Camera</strong> User’s <strong>Manual</strong><br />
4 Alarm inputs are available and each alarm is activating to presets, group tours or<br />
H-1. ALARAM SET – ALARM NO.<br />
on ALARM NO.<br />
Up to 4 alarms are selectable by using five keys to the right direction when cursor is<br />
H-2. ALARAM SET – ALARM INPUT<br />
Close)<br />
ALARM SET<br />
ALARM NO : 01<br />
ALARM INPUT: OFF<br />
ALARM ACT : 001<br />
SAVE<br />
EXIT<br />
Input alarm ways provide two different ways as NC (Normal Close) or NO (Normal<br />
The default setting is OFF<br />
H-3. ALARAM SET – ALARM ACT<br />
Alarm activates various surveillance modes with Preset number up to 165, Group<br />
tour up to 8, Pattern up to 8. Move five keys to the right or left direction to select any<br />
preset number, group tour no. or pattern no.<br />
H-4. ALARAM SET – SAVE<br />
After setting the alarm input ways and activation, to save the data, move five keys to<br />
the right direction when the cursor is on SAVE. After saving the data, the cursor moves<br />
to Alarm NO.2 automatically to prepare the next alarm.<br />
H-5. ALARAM SET – EXIT<br />
DEFAULT SETTING<br />
To escape this page, move five keys to the right direction
Change language