Condensed Catalog Featuring R410A Products Third Edition

Technical leaflet
Hermetic Condensing Units, type CMW/CMEW/CLW/CLEW–Water Cooled
Introduction
Danfoss commercial air- and water-cooled
condensing units are designed around the
Maneurop reciprocating compressor and share
the legendary Maneurop reliability. All units are
fitted with a high efficiency condenser, compressor
sight glass, suction and discharge valves and
built in protections for pressure, temperature and
current. All have a pre-wired electrical enclosure
with contactor and in 460 V (-4) verisions, a control
circuit transfer. All air-cooled units are a two fan
design and include a self regulating PTC crankcase
heater.
Condensing Unit Nomenclature
CM
E W 50 3 AA
Model Series
CM = Condensing unit with MT compressor
CL = Condensing unit with LT compressor
Bill of Material Code
AA = standard product
Call Danfoss engineering for
a list of available options
(410-931-8250)
Type of Oil
E = P.O.E. oil (polyolester oil)
Blank = Mineral Oil
Unit Power Supply
1 = (208-230/1/60)
3 = (208-230/3/60)
4 = (460/3/60)
Condenser Type
W = Water Cooled
Compressor size
How to order:
To order a condensing unit, the following is
required:
1. Model series
2. Type of oil
3. Condenser type
4. Compressor size
5. Unit power supply
6. BOM Code
Example:
To order a standard 460/3/60 water cooled
condensing unit with POE oil and a MTZ 50
compressor the model number is
CM E W 50 4 AA
1 2 3 4 5 6
© Danfoss Inc. 01-07 (USCO)
USCOC.PK.000.C1.22 137