Adobe PDF format - z/VM - IBM

2.5.2 SDOZVM54 PRODPART
This file is generally placed on the MAINT 2C2 (Samples & Install Tools Disk). The file contains the
saved segment definitions for the z/VM SDO Licensed Products.
The VMSES/E SEGDATA file may be updated with the Saved Segment (DCSS) definitions for all the z/VM
SDO Licensed Products at the same time by following the instructions in Appendix D.2, “Creating Saved
Segments Utilizing the” on page 300.
After the VMSES/E SEGDATA file has been updated, the VMSES/E VMFBLD Command may be utilized
to define and create the Saved Segments for VMSES/E Format Licensed Products.
The Saved Segments for z/VM SDO Semi-VMSES/E Licensed Products must be defined and created by
following the instructions in the Technical Notes provided for each z/VM SDO Semi-VMSES/E Licensed
Products.
2.5.3 Installation Steps for the Enabling Aid
The Enabling Aid files are available as a download on the z/VM SDO Website.
http://www.vm.ibm.com/sdo/
The Enabling Aid files are provided in VMARC Archive format. The following are the general steps
required to transfer the VMARC Archive file to a z/VM System and to unpack the Enabling Aid files from
the VMARC Archive file.
1. On the VM SDO Home Page, click on 'z/VM 5.4.0 SDO (5741-A06)'
This will take you to a Webpage that lists the z/VM 5.4.0 SDO specific documents that are
available on-line, including the SDO Enabling Aid.
2. On the VM SDO Document Page, click on 'z/VM SDO Enabling Aid'
This will take you to a Webpage that contains the SDO Enabling Aid download link and
information on how to upload the VMARC Archive file from your PC to a z/VM and then unpack
the VMARC Archive file.
3. On the SDO Enabling Aid Webpage, click on 'Download z/VM SDO Enabling Aid'
This will download the VMARC Archive file with the Enabling Aid files to your PC.
If you are using Microsoft Internet Explorer, click on the link and save the archive file to your PC.
If you are us Mozilla Firefox, right click on the link and select 'Save link as ...' to save the archive
file to your PC.
4. Upload the VMARC Archive file with the Enabling Aid files from your PC to your z/VM System.
The VMARC Archive file must be uploaded in binary.
5. On the z/VM System, perform the following steps to unpack the VMARC Archive file.
14 z/VM SDO Program Directory