EH8008PB - Electrohome
EH8008PB - Electrohome
EH8008PB - Electrohome
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Problems and troubleshooting<br />
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service<br />
outlet if problems persist.<br />
Be sure all connections are properly made when using with other units.<br />
SYMPTOMS<br />
DVD/VCR<br />
DVD/VCR does not operate.<br />
No picture.<br />
No sound.<br />
POSSIBLE SOLUTIONS<br />
• Make sure the power cord is plugged in.<br />
• Try another AC outlet.<br />
• Power is off, check fuse or circuit breaker.<br />
• Unplug unit, then plug it back in.<br />
• Select the DVD or VCR mode before operating.<br />
• Antenna connection is not correct or antenna cable is disconnected.<br />
• Check the unit is connected correctly.<br />
• The video channel is not in the correct position or the TV is not set to<br />
the video channel 3 or 4.<br />
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or<br />
equivalent).<br />
• Channel is set to the external mode.<br />
• Check the unit is connected correctly.<br />
• Check the input selector of the amplifier is set properly.<br />
• The unit is in the Special playback mode.<br />
PAGE<br />
9<br />
–<br />
–<br />
9<br />
–<br />
10,11<br />
12~17<br />
18<br />
–<br />
–<br />
12~17<br />
–<br />
21,28<br />
The remote control does not function.<br />
No CABLE reception.<br />
VCR<br />
• Aim at the remote control at the remote sensor.<br />
• Operate within Approx. 5 Meters or reduce the light in the room.<br />
• Clear the path of the beam.<br />
• The batteries are weak. Replace the batteries.<br />
• Check the batteries are inserted correctly.<br />
• Check all CABLE connections.<br />
• Station or CABLE system problems, try another station.<br />
9<br />
11<br />
• The erase prevention tab of the video cassette is broken off.<br />
TV recording does not work.<br />
• The unit is in the external input mode.<br />
21,23<br />
Timer recording does not work.<br />
Noise bars on screen.<br />
DVD<br />
• The time is not set correctly.<br />
• The recording start/end time is not set correctly.<br />
• TIMER REC has not been pressed ( is not lit).<br />
• Tracking adjustment beyond range of automatic tracking circuit. Try<br />
Manual tracking adjustment.<br />
• Video heads are dirty.<br />
• The tape is worn or damaged.<br />
Display is not shown in your language. • Select proper language in the menu options.<br />
27<br />
19,20<br />
24<br />
24<br />
21,22<br />
37<br />
–<br />
Playback doesn’t start.<br />
Stopping playback, search, slowmotion<br />
play, repeat play, or program<br />
play, etc. cannot be performed.<br />
No picture, or the screen is blurred or<br />
divided into two parts.<br />
• No disc is inserted.<br />
• The disc may be dirty. Clean up the disc.<br />
• The unit cannot play DVD-ROMs, etc.<br />
• Some discs may not do some of the functions.<br />
• The S-VIDEO/COMPONENT selector is not set correctly.<br />
• The progressive scanning mode is active through the unit is<br />
connected to a TV via the VIDEO OUT jack.<br />
28<br />
27<br />
27<br />
–<br />
12<br />
34<br />
36<br />
2D80321A[E](32-BACK) 36<br />
9/6/04, 10:35