30.01.2015 Views

Annuncicom Technical Documentation V4.02 (PDF) - Barix

Annuncicom Technical Documentation V4.02 (PDF) - Barix

Annuncicom Technical Documentation V4.02 (PDF) - Barix

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 8<br />

Entry 6 IP<br />

1316<br />

B1316,<br />

B1317,<br />

B1318,<br />

B1319<br />

4 0.0.0.0<br />

Destination IP for the connection (on type Raw UDP 0.0.0.0 is<br />

the subnet broadcast IP address), (on type Raw TCP 0.0.0.0<br />

means listener on the corresponding port)<br />

Table 8<br />

Entry 6 Port<br />

Table 8<br />

Entry 7<br />

Type<br />

1320 W1320 0 0<br />

1322 B1322 1 3<br />

Destination Port for the connection (0 for use UDP Rx Port, if<br />

this is 0 use default 3030)<br />

Type for the connection (0=Internet Radio, 1 = Raw UDP, 2 =<br />

Raw TCP, 3=not used)<br />

Table 8<br />

Entry 7 IP<br />

1323<br />

B1323,<br />

B1324,<br />

B1325,<br />

B1326<br />

4 0.0.0.0<br />

Destination IP for the connection (on type Raw UDP 0.0.0.0 is<br />

the subnet broadcast IP address), (on type Raw TCP 0.0.0.0<br />

means listener on the corresponding port)<br />

Table 8<br />

Entry 7 Port<br />

Table 8<br />

Entry 8<br />

Type<br />

1327 W1327 0 0<br />

1329 B1329 1 3<br />

Destination Port for the connection (0 for use UDP Rx Port, if<br />

this is 0 use default 3030)<br />

Type for the connection (0=Internet Radio, 1 = Raw UDP, 2 =<br />

Raw TCP, 3=not used)<br />

Table 8<br />

Entry 8 IP<br />

1330<br />

B1330,<br />

B1331,<br />

B1332,<br />

B1333<br />

4 0.0.0.0<br />

Destination IP for the connection (on type Raw UDP 0.0.0.0 is<br />

the subnet broadcast IP address), (on type Raw TCP 0.0.0.0<br />

means listener on the corresponding port)<br />

Table 8<br />

Entry 8 Port<br />

Stop<br />

backgroun<br />

d TCP<br />

streams<br />

1334 W1334 0 0<br />

1336 B1336 1 0<br />

Destination Port for the connection (0 for use UDP Rx Port, if<br />

this is 0 use default 3030)<br />

TCP flow-control setting for streams interrupted by priority<br />

stream (background streams). If not 0, TCP connections are<br />

stopped (full buffer is announced in TCP flow-control). 0 means<br />

any incoming data of background streams are accepted and<br />

thrown away.<br />

UDP connections are not affected.<br />

38 Software Application Interface

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!