Coin changer - National Rejectors Inc. GmbH

c 2 Configuration
Pe r i p h e r a l
Specifying active levels of the hopper payout and empty signal
Quick approach:
In order that the coin changer is able to evaluate the signals coming from
the hopper(s), when a hopper pays out a coin or is empty and can no longer
pay out coins (only with optional empty detection), you must set the signals’
active levels (low/high).
Make sure that all hoppers connected use the same active level for
the coin signal or the empty signal (cp. separate manuals for the NRI
hopper currenza h 2 and hopper interface).
To specify the active levels:
= Main menu > E = Settings > Peripheral > Hopper > Coin signal/empty signal of hopper
Press key ... How often? Effect
1 1 x You enter the main menu
2 1 x You enter the Se t t i n g menu
3 until Peripheral You want to enter submenu Pe r i p h e r a l
4 1 x You enter the submenu
5 until Hopper You want to enter submenu Ho p p e r
6 1 x You enter the submenu
7
until Coin signal of
hopper
You want to specify the active level of
the coin payout signals coming from
the hopper
8 1 x Now you can specify the active level
9 /
until setting desired
The signals are supposed to be Hig h/
a c t i v e / Lo w/a c t i v e
10 1 x You lock the setting in memory
11 Press -key and repeat steps 8 to 10 to specify the empty signal coming from the hopper
(only for hoppers with empty detection)
12 1 x/2 x
You return to main menu/operating
mode
National Rejectors, Inc. GmbH, Buxtehude
49