SILENT KNIGHT MODEL 5207

More documents

Recommendations

Info

Compatible Product Installation 4.3 Four-Wire Smoke Detector Connection Figure 4-3 illustrates how UL listed four-wire smoke detectors must be connected to class B (style A) zones. When wiring a four-wire smoke detector to the class B (style A) zones, you must use a Power Supervision Unit, such as Silent Knightís 160150. Figure 4-3 Four-Wire Smoke Detector Wiring See Appendix A for a list of four-wire smoke detectors that may be used with the 5207. 150865 4-3
Model 5207 Installation and Operation Manual 4.4 Two-Wire Smoke Detector Connection Figure 4-4 shows how to connect two-wire smoke detectors to class B (style A) zones. Figure 4-4 Two-Wire Smoke Detector Wiring See Appendix A for a list of two-wire smoke detectors that may be used with the 5207. 4.5 Model 4180 Status Display Module The Model 4180 Status Display module provides remote annunciation of alarm and trouble status information for each zone. The 4180 has 2 connectors, each of which has 8 outputs available for annunciation. These outputs are active high at +12 VDC. Each output can provide up to 100 mA of current, with a total limitation of 700 mA. The module has 4 normally open non-dedicated relays that can be wired to be active with any of the outputs. The 4180 is not supervised. 4-4 150865
Page 1 and 2: SILENT KNIGHT MODEL 5207 Fire Contr
Page 3 and 4: Model 5207 Fire Control/Communicato
Page 27: Model 5207 Installation and Operati
Page 31 and 32: Model 5207 Installation and Operati
Page 79 and 80:
Model 5207 Fire Control/Communicato
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
show all

SILENT KNIGHT MODEL 5207

Create successful ePaper yourself

Delete template?

Save as template?