LCD Television - Toshiba Canada

Learning about the remote control
The buttons used for operating the TV only are described
here. For a complete list of the remote control’s functions, see
the remote control functional key chart (� page 23).
Note: The error message “NOT AVAILABLE” may appear if
you press a key for a function that is not available.
Chapter 3: Using the remote control
1�
2�
3�
4�
5�
6�
7�
8�
9�
POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
PIC MODE selects the picture mode (� page 34).
SLEEP accesses the sleep timer (� page 41).
PIC SIZE cycles through the picture sizes: Full,
TheaterWide 1/2/3, Natural(� page 33).
Channel Numbers (0–9, –/100) directly tune
channels. The button is used to tune digital channels
(� page 32) or to be the numeric key for other function.
INPUT selects the video input source (� page 32).
CH pq cycles through programmed channels (� page
30).
VOL + – adjusts the volume level.
FAV BROWSER accesses the favorites list in the
Favorites Channel Set Menu (� page 32).
10� RECALL displays TV status information (� page 42).
11� CH RTN returns to the last viewed channel (� page 32).
12� MUTE reduces or turns off the sound (� page 36).
13�
14�
15�
INFO displays TV status information as well as program
details, when available (� page 42).
Arrow buttons (pqtu) When a menu is on-screen,
these buttons select or adjust programming menus.
ENTER activates highlighted items in the main menu
system.
16� MENU accesses the main TV menu system (� page 27).
17� EXIT closes on-screen menus.
18�
MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes (� page 22).
Set to “TV” to control the TV.
1