Gas Management Systems System Components Catalogue – ISO Standard
With over 50 years of experience in the planning and manufacturing of medical gas management systems, Dräger is one of the market and technology leaders in Germany as well as in the international market. Our systems, installed and maintained by Dräger installation specialists and DrägerService technicians, offer premium reliability and safety, above-average durability, and meet the highest quality standards. Medical gases (oxygen, compressed air, nitrous oxide, and carbon dioxide) and vacuum must be safely and reliably available at all times. We deliver tailor-made system solutions, so that your hospital always has the correct gas available in the correct quantities and quality. From planning consultation to assembly and subsequent after-sales service, we provide complete services from one source regardless of whether it is a new development, an enlargement or a renovation. Not all articles are available worldwide.
With over 50 years of experience in the planning and manufacturing of medical
gas management systems, Dräger is one of the market and technology leaders
in Germany as well as in the international market.
Our systems, installed and maintained by Dräger installation specialists and
DrägerService technicians, offer premium reliability and safety, above-average
durability, and meet the highest quality standards.
Medical gases (oxygen, compressed air, nitrous oxide, and carbon dioxide) and
vacuum must be safely and reliably available at all times. We deliver tailor-made
system solutions, so that your hospital always has the correct gas available in the
correct quantities and quality. From planning consultation to assembly and
subsequent after-sales service, we provide complete services from one source
regardless of whether it is a new development, an enlargement or a renovation.
Not all articles are available worldwide.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
46 | GAS MANAGEMENT SYSTEMS | COMPRESSED AIR SYSTEMS<br />
REFRIGERATION DRYER<br />
REFRIGERATION DRYER<br />
REFRIGERATION DRYER 50 HZ<br />
For dehumidification of the compressed air by lowering the dew-point<br />
temperature, to protect the upstream piping system against condensate<br />
DC0125AB - DC0450AB for 50 Hz voltage supply.<br />
Compressed Air Refrigeration Dryer DC 0125 AB, 50 Hz<br />
Operating pressure: 16 bar<br />
G31038<br />
Refrigeration Dryer<br />
Compressed Air Refrigeration Dryer DC 0150 AB, 50 Hz<br />
Compressed Air Refrigeration Dryer DC 0180 AB, 50 Hz<br />
Compressed Air Refrigeration Dryer DC 0225 AB, 50 Hz<br />
Compressed Air Refrigeration Dryer DC 0300 AB, 50 Hz<br />
Compressed Air Refrigeration Dryer DC 0360 AB, 50 Hz<br />
Compressed Air Refrigeration Dryer DC 0450 AB, 50 Hz<br />
Operating pressure: 14 bar<br />
G31039<br />
G31040<br />
G31041<br />
G31042<br />
G31043<br />
G31044<br />
TECHNICAL DATA REFRIGERATION DRYER 50 HZ<br />
Pressure dew point<br />
Heat exchange system<br />
Condensate drain<br />
Case<br />
Alarm terminals<br />
Dew point alarm<br />
Inlet temp.<br />
Overload capacity<br />
Noise level<br />
Electrical protection class<br />
Environmental temperature<br />
Certificate of conformity<br />
Voltage<br />
3° C<br />
(Inlet temperature: 35° C, ambient temperature: 25° C, operation pressure 7 bar)<br />
consisting of air/air, cryogen/air heat exchanger and condensate drain<br />
integrated, electronically level regulated<br />
zinc plated, varnished metal<br />
dew point and condensate drain, 240 V AC, 1 A<br />
pre-set to 10° C<br />
max. 70° C<br />
up to approx. +20°C<br />
below 70 dB(A)<br />
IP20<br />
min. +2° C/max. +50° C<br />
acc. to 2006/42/EG Appendix II A<br />
230 V AC<br />
Description Order no. Flow rate Operation Pressure los Power Cooling air Cryogen Connection Dimensions Weight<br />
pressure demand (W×H×D)<br />
m³/h bar bar W m³/h mm kg<br />
KT DC0125AB G31038 125 16 0.22 0.46 300 R134a 1" 360×410×645 34<br />
KT DC0150AB G31039 150 14 0.19 0.47 300 R134a 1¼" 480×660×870 55<br />
KT DC0180AB G31040 180 14 0.22 0.72 380 R134a 1¼" 480×660×870 56<br />
KT DC0225AB G31041 225 14 0.23 0.80 380 R407c 1¼" 480×660×870 57<br />
KT DC0300AB G31042 300 14 0.19 0.70 450 R407c 1½" 480×660×870 68<br />
KT DC0360AB G31043 360 14 0.26 0.76 450 R407c 1½" 480×660×870 74<br />
KT DC0450AB G31044 450 14 0.04 0.80 450 R407c 2" 645×920×1055 116
Change language