ELECTRONIC THREE-SPEED AUTOMATIC WASHERS with ...
ELECTRONIC THREE-SPEED AUTOMATIC WASHERS with ...
ELECTRONIC THREE-SPEED AUTOMATIC WASHERS with ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ACCESSING COMPONENTS IN THE WASHER CABINET<br />
Components inside the washer cabinet can be accessed by completely removing<br />
the outer cabinet as one unit. Refer to Figure 5 for the following instructions.<br />
1. Remove the console mounting screws and<br />
tilt the console into the service position.<br />
Fig. 5<br />
INSET 1<br />
2. Unplug the lid switch harness connector<br />
from the receptacle in the washer top.<br />
CLIP<br />
3. Remove the cabinet mounting clips<br />
by placing the flat blade of a screwdriver<br />
in the clip as shown in Figure 5, Inset 1.<br />
CLIP<br />
4. Rotate the access cover on the washer top clockwise to expose the hose assemblies underneath.<br />
(Fig. 6)<br />
5. Disconnect the bleach dispenser venturi hoses and the detergent and fabric softener inlet<br />
hoses as indicated in Figure 6.<br />
BLEACH DISPENSER<br />
VENTURI HOSE<br />
VENTURI<br />
FABRIC SOFTENER<br />
DISPENSER<br />
OUTLET HOSE<br />
BLEACH DISPENSER<br />
VENTURI HOSES<br />
DETERGENT<br />
DISPENSER<br />
INLET HOSE<br />
Fig. 6<br />
6. Pull the inner basket forward, to avoid damage to the tub ring, splash guard and shield. Remove<br />
the cabinet by tilting it forward and pulling it away from the washer. (Fig. 7)<br />
Fig. 7<br />
CABINET<br />
18
Change language