56038502 HSDPA User Guide:Telular UG.qxd

More documents

Recommendations

Info

4. The Connect dialog will open. Click Properties > Options. Uncheck Prompt for phone number and Prompt for name and password, certificate, etc.. Set Time between redial attempts to 10 seconds and click OK. 5. Your computer will dial the new connection. USB Connection Option 6. Follow the instructions found in “Using the Telular Device Manager” on page 6 and “Setting Up Your Wireless WAN Data Connection” on page 8 to launch the Telular Device Manager and complete your USB data connection. Wi PATH TM SX7 16 User Guide
Using the Voice and Fax Options (SX7T Only) The Wi PATH SX7T Voice/Fax/Data terminal lets you use your wireless service provider for voice calling and faxing (similar to standard PSTN telephone operation) in addition to using the Wireless WAN data features. Note Before proceeding, please confirm with your wireless service provider that your account has been provisioned for voice services. Using the Voice Calling Features on Your SX7T 1. To use the SX7T’s voice calling feature, plug an RJ-11 phone cable into the Phone or Phone/Fax input on the back panel. 2. Connect the other end of the phone cable into your phone’s RJ-11 input jack. 3. Lift the phone handset off the receiver (or press the TALK or ON button on a cordless phone) and listen for a dial tone. 4. If you hear a dial tone, make a call to confirm your service is active. Your voice service and calling options should be the same as those on your wireless phone. For additional programming and setup options, please see “Voice/Fax Programming” on page 19. Note Tip Phone/Fax (J2) Phone (J1) Voice and Fax Options (SX7T Only) Your SX7T should be configured to accept voice signals on both the phone and the phone/fax inputs by default. For questions about your voice service, please contact your wireless service provider. If you experience a buzzing in your phone’s earpiece, try moving your phone farther away from the SX7T, and make sure the RJ-11 phone cable is routed away from the antennas. Wi PATH TM SX7 17 User Guide
Page 1 and 2: Wi PATH TM SX7T Terminal and SX7M M
Page 3 and 4: Introduction Thank you for choosing
Page 5 and 6: 2.Install the Rechargeable Battery
Page 7 and 8: 5. (Optional) For optimal performan
Page 9 and 10: Using the Telular Device Manager Th
Page 11 and 12: Setting Up Your Wireless WAN Data C
Page 13 and 14: 9. To confirm your data connection,
Page 15 and 16: Using the USB Connection Option The
Page 17: USB Connection Option � On the Se
Page 21 and 22: � For RJ-11 Jack Mode (4) select
Page 23 and 24: Basic (cont.) Call Control RJ-11 Ja
Page 25 and 26: Advanced Data Connection Options Th
Page 27 and 28: Setup > Keep Alive Keep Alive lets
Page 29 and 30: Setup > SIM These options allow you
Page 31 and 32: Advanced Data Connection Options
Page 33 and 34: Network > Port Forwarding This scre
Page 35 and 36: Admin > Factory Defaults Click Rest
Page 37 and 38: � Service Provider Name: The name
Page 39 and 40: PSTN Options See “Voice/Fax Progr
Page 41 and 42: Advanced Settings This section expl
Page 43: Static DNS - Static Domain Naming S

56038502 HSDPA User Guide:Telular UG.qxd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?