tandem vector owner's manual
tandem vector owner's manual
tandem vector owner's manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SIGMA TANDEM SYSTEM OWNER’S MANUAL<br />
Flake the material between the A and B lines<br />
away from the line channel in the center of the<br />
pack job. Be sure that all of the T-seams to the<br />
outside of the center cell are neatly flaked. Find<br />
the bottom seams to the outside of the center<br />
cell and flake them out toward the stabilizer.<br />
Make sure the B lines are grouped together and<br />
stacked neatly on top of the A lines. Smooth<br />
out the fold between the A and B lines.<br />
Fold the flaked A to B material in half towards<br />
the center of the pack job. Do not go beyond<br />
the line attachment points.<br />
Repeat the previous steps to flake the material<br />
between the B and C lines. Continue flaking<br />
process for the material between the C & D lines.<br />
Page 8:X Section 2: Equipment • Chapter 3 - Packing the Reserve w/ Skyhook 11301 - 00.00.0000