tandem vector owner's manual
tandem vector owner's manual
tandem vector owner's manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SIGMA TANDEM SYSTEM OWNER’S MANUAL<br />
Dress the pack job to the finished shape desired.<br />
2" to 3" of canopy material protruding from the<br />
mouth of the bag will help fill the reserve<br />
container corners.<br />
Do not rely on the container to shape the pack<br />
job or hide poor bulk distribution!<br />
The bagged canopy should reflect the desired<br />
shape of the rig for best results.<br />
It should be square at the bottom, wedge<br />
shaped in profile, and thin at the top.<br />
When pressing down on the pack job, it should<br />
be firm at the mouth of the bag and get<br />
progressively softer as you get closer to the<br />
bridle attachment point.<br />
Place two velcro protectors on the line stow<br />
pouch.<br />
Stow the remainder of the suspension lines into<br />
the pouch on the underside of the bag using S-<br />
folds that extend from one side of the pouch to<br />
the other. Be sure none of the lines are trapped<br />
between the hook and loop fastener at the<br />
mouth of the pouch. Remove the two velcro<br />
protectors from the bag.<br />
Page 18:X Section 2: Equipment • Chapter 3 - Packing the Reserve w/ Skyhook 11301 - 00.00.0000