Download [PDF] - InventorCAM

HIGH SPEED SURFACE MACHINING (HSS)
The hss_IV.prz example illustrates the use of several InventorCAM High
Speed Surface Machining (HSS) strategies to machine the base part shown
above.
The following InventorCAM operations are created to perform the machining:
• Engraving (HSS_Projection_selected_faces,
HSS_Projection_selected_faces_1,
HSS_Projection_selected_faces_2,
HSS_Projection_selected_faces_3)
These operations utilize the HSS Engraving strategy to perform
the machining of four fillet areas. A ball nose mill of Ø10 is used.
The Depth Cut option is used to machine the whole the depth
in several cutting passes.
• Morphing machining (HSS_MORPH_CURVES_selected_
faces_4, HSS_MORPH_CURVES_selected_faces_6)
This operation performs the machining of two internal fillet areas
using the Morph between two curves strategy. This strategy
is utilized to generate the tool path evenly distributed between
the fillet boundaries. The gouge checking strategy is used to avoid
possible gouges between the tool and the faces of the machining
area. A ball nose mill of Ø10 is used.
16
InventorCAM + Inventor = The Complete Integrated Manufacturing Solution