Download [PDF] - InventorCAM

MILL-TURN
The mill_turn_2_IV.prz example illustrates the use of the InventorCAM Mill-
Turn module for the machining of the console part shown above on a 5-axis
Mill-Turn CNC-Machine.
The following Turning and Milling operations are used to perform the
machining of the part:
• Turning (TR_profile)
This turning operation is used to generate the tool path for the
rough and finish machining of the external cylindrical faces.
• Indexial milling (F_profile_6)
This Profile operation is used to perform the machining of the
cube sides using the InventorCAM indexial milling capabilities.
Position #2 of Coordinate System #2 is used for the operation.
The Transform option is used to create a circular pattern of
operations around the revolution axis in order to machine all the
cube faces.
An end mill of Ø16 is used for the operation.
• Horizontal faces machining (F_profile_1)
40
This Profile operation is used to perform the indexial milling of the
horizontal faces at the front part of the console. Position #4 of
Coordinate System #1 is used for the operation.
InventorCAM + Inventor = The Complete Integrated Manufacturing Solution