Download [PDF] - InventorCAM

More documents

Recommendations

Info

• External Finishing (TR_profile) This Turning operation is used to perform the external faces finishing. The Profile Work type is chosen to generate the finishing pass. An External roughing tool is used for the operation. • Internal Turning (TR_profile_2) This Turning operation is used to perform the internal faces finishing. The Profile Work type is chosen to generate the finishing pass. An Internal roughing tool is used for the operation. • External Grooving (GR_profile3) This Grooving operation is used to perform rough and finish machining of the external groove faces. An External grooving tool is used for the operation. • Internal Grooving (GR_profile_4) This Grooving operation is used to perform rough and finish machining of the internal groove faces. An Internal grooving tool is used for the operation. • External Threading (TH_profile_5) This Threading operation is used to perform the machining of the external thread with the minimal diameter of 56 mm and pitch of 1.5 mm. An External threading tool is used for the operation. • Internal Threading (TH_profile_6) This Threading operation is used to perform the machining of the internal thread with the maximal diameter of 33.5 mm and pitch of 1.5 mm. An Internal threading tool is used for the operation. • Parting (GR_profile_7) This Grooving operation is used to perform the parting (cut-off) of the machined part from the stock bar. The Cut Work type is used for the operation. An External grooving tool is used for the operation. 35 www.inventorcam.com
TURNING The turning_2_IV.prz example illustrates <strong>InventorCAM</strong> functionality for Rest Material machining, during longitudinal and facial rough/finish turning operations, performed on the wheel part shown above. The following Turning operations are used to perform the machining of the part: • External Roughing (TR_profile) This operation is used to generate the tool path for the external faces roughing. An External roughing tool is used for the operation. The Long Process type is chosen for the operation to perform the machining in the longitudinal direction. The Rough Work type is chosen for the operation; with this Work type the rough machining is performed in a number of equidistant passes. • External Rest Material Roughing (TR_profile) This operation utilizes the Rest Material option to perform the machining of the areas left unmachined after the previous operation. These areas were unmachined because of the orientation and geometry of the tool used in the previous operation. In this operation a tool with opposite orientation is used to machine the part, moving in the positive Z-direction. 36 <strong>InventorCAM</strong> + Inventor = The Complete Integrated Manufacturing Solution
Page 1 and 2: InventorCAM + Inventor The complete
Page 3 and 4: INVENTORCAM 2013 - THE CUTTING EDGE
Page 5 and 6: Complete gouge control is available
Page 7 and 8: InventorCAM enables flexible set-up
Page 9 and 10: 2.5D MILLING The 2_5D_Milling_1_IV.
Page 11 and 12: 2.5D MILLING The 2_5D_Milling_2_IV.
Page 13 and 14: FEATURE RECOGNITION The drill_pocke
Page 15 and 16: HIGH SPEED SURFACE MACHINING (HSS)
Page 17 and 18: 3D MILLING The 3D_Milling_1_IV.prz
Page 19 and 20: 3D MILLING 20 The 3D_Milling_2_IV.p
Page 21 and 22: HIGH SPEED MACHINING (HSM) The hsm_
Page 23 and 24: HIGH SPEED MACHINING (HSM) The hsm_
Page 25 and 26: MULTI-SIDED MACHINING The multi_sid
Page 27 and 28: MULTI-SIDED MACHINING The multi_sid
Page 29 and 30: SIM. 5-AXIS MACHINING The sim_5_axi
Page 31 and 32: SIM. 5-AXIS MACHINING The sim_5_axi
Page 33: TURNING The turning_1_IV.prz exampl
Page 37 and 38: MILL-TURN The mill_turn1_IV.prz exa
Page 39 and 40: MILL-TURN The mill_turn_2_IV.prz ex
Page 41 and 42: MILL-TURN - 2 SPINDLES The back_spi
Page 43 and 44: WIRE CUT The wire_cut_IV.prz exampl
Page 45 and 46: TRAINING MATERIALS The following tr

Download [PDF] - InventorCAM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?