Download [PDF] - InventorCAM

TURNING
The turning_1_IV.prz example illustrates the use of the InventorCAM
Turning for the machining of the part shown above.
The following Turning operations are used to perform the machining of the
part:
• External Roughing (TR_profile)
This operation is used to generate the tool path for the external
faces roughing. An External roughing tool is used for the
operation. The Long Process type is chosen for the operation
to perform the machining in longitudinal direction. The Rough
Work type is chosen for the operation; with this Work type the
rough machining is performed in a number of equidistant passes.
• Facial Turning (TR_profile_1)
This operation is used to generate the tool path for the front face
machining. An External roughing tool is used for the operation.
The Face Process type is chosen for the operation to perform
the machining in facial direction. The Rough work type is chosen
for the operation; with this work type the rough machining is
performed in a number of equidistant passes.
• Drilling (DRILL)
34
This Drill operation is used to perform the rough machining of the
hole. A U-Drill tool of Ø28 is used for the operation.
InventorCAM + Inventor = The Complete Integrated Manufacturing Solution