Download [PDF] - InventorCAM

WIRE CUT
The wire_cut_IV.prz example illustrates the use of the InventorCAM Wire
Cut module for the conical gear machining.
The following Wire Cut operations are used to perform the machining of the
part:
• Central cut machining (F_contour)
This Profile operation is used to machine the central through
cut. The Later option is used for the Auto Stop technology,
generating a postponed separate sub-operation preventing the
material dropping.
• Gear face machining (X_four_axis)
The 4-axis operation is used to machine the conical gear shape.
The insertion point of the wire is chosen outside the cylindrical
stock, simplifying the approach of the wire to the machining
contour.
Refer to the Wire Cut User Guide for more information about the Wire Cut
module.
44
InventorCAM + Inventor = The Complete Integrated Manufacturing Solution