iS5 English _V2.11__0406 - Back - morek.eu
iS5 English _V2.11__0406 - Back - morek.eu
iS5 English _V2.11__0406 - Back - morek.eu
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 - Operation<br />
2.4 Operation Method<br />
The <strong>iS5</strong> has several operation methods as shown below.<br />
Operation Method Function Function Setting<br />
Operation using Keypad Run/Stop command and frequency are set only through the<br />
keypad.<br />
DRV 03: Keypad<br />
DRV 04: Keypad-1 or -2<br />
Operation using<br />
Control Terminals<br />
Closing FX or RX terminal performs Run/Stop.<br />
Frequency reference is set through V1 or I or V1+I terminal.<br />
DRV 03: Fx/Rx-1 or -2<br />
DRV 04: V1 or I or V1+I<br />
Operation using both<br />
Keypad and Control<br />
Terminals<br />
Run/Stop is performed by the keypad.<br />
Frequency reference is set through the V1 or I or V1+I<br />
terminal.<br />
DRV 03: Keypad-1 or -2<br />
DRV 04: V1 or I or V1+I<br />
Operation using<br />
Option Board<br />
Closing FX or RX terminal performs Run/Stop.<br />
Frequency reference is set through the keypad.<br />
Operation using option board.<br />
The <strong>iS5</strong> has five option boards and three sub-boards.<br />
Option Boards: RS485, Device-Net, F-Net, ProfiBus and<br />
ModBus<br />
Sub-Boards: Sub-A Board, Sub-B Board, Sub-C Board<br />
(Please refer to ‘Chapter 7 - Options’for more information.)<br />
DRV 03: Fx/Rx-1 or -2<br />
DRV 04: Keypad-1 or -2<br />
32