28.06.2015 Views

4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...

4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...

4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

¡Hot keep M mode [During HI POWER operation (for 15 min.)]<br />

Indoor blower<br />

1st speed<br />

2nd speed<br />

3rd speed<br />

4th speed<br />

5th speed<br />

Indoor heat exchanger temp. (˚C)<br />

6th speed<br />

7th speed<br />

8th speed<br />

OFF<br />

a b 29 31 32 34 38 42 50<br />

Note (1) Refer to the table shown above right for the values a and b.<br />

¡ Values of a, b<br />

a b<br />

At 0 Hz command 22 25<br />

Other than 0 Hz<br />

command<br />

17 19<br />

◆SRRM40 model<br />

¡Normal mode<br />

Indoor blower<br />

Hi<br />

Me<br />

Lo<br />

ULo<br />

OFF<br />

a b 38 41 44<br />

Indoor heat exchanger temp. (˚C)<br />

Note (1) Refer to the table shown above right for the values a and b.<br />

¡ Values of a, b<br />

a b<br />

At 0 Hz command 30 33<br />

Other than 0 Hz<br />

command<br />

17 30<br />

(f)<br />

Defrosting<br />

(i) When the following conditions are met, the defrosting operation will start.<br />

1) During normal operation<br />

a) When 30 minutes has passed since the start of heating or 30 minutes after the last defrosting (Cumulative actual<br />

operating time of compressor other than the outdoor unit frequency 0 Hz).<br />

b) When the outdoor heat exchanger thermistor temperature is –2 °C or less for 3 continuous minutes after 27 minutes<br />

have passed.<br />

c) Outdoor thermistor temperature (Th6) – Outdoor gas piping thermistor temperature 0.44 × Outdoor thermistor<br />

temperature + A °C or more. Avalue : Th6 –2°C · 4, Th6 < –2°C · 6<br />

d) When the compressor is operating.<br />

u In addition, defrosting operation will start when the count of the decision frequency has become 0 Hz reaches 10<br />

times or more and when all the conditions presented above in a), b) and d) are met.<br />

2) During defrosting acceleration<br />

a) When 30 minutes has passed since the last defrosting (Cumulative actual operating time of compressor other than<br />

the outdoor unit frequency 0 Hz).<br />

b) When the compressor is operating.<br />

u In addition, defrosting operation will start when the count of the decision frequency has become 0 Hz reaches 10<br />

times or more and when all the conditions presented above in a) and b) are met.<br />

Note (1) Defrosting acceleration is when the finishing of the previous defrosting is according to the defrosting conditions of the 10 minutes that have<br />

passed.<br />

≤<br />

≤<br />

142

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!