4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...
4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...
4. INVERTER MULTI-SPLIT SYSTEM ROOM AIR-CONDITIONER ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
(c)<br />
(d)<br />
Installation<br />
The following is the procedure for installing the air outlet grille for suspended ceiling (RKB12).<br />
Installation procedure<br />
1) Mount the air outlet duct to the indoor unit<br />
using the eight tapping screws.<br />
2) Remove the motor cover on the right side of<br />
the air outlet duct, connect the connecting<br />
wire for louver motor and secure with clamp.<br />
3) Connect one end of the connecting wire for<br />
louver motor to the connector for the louver<br />
motor inside the controller and use the clamp<br />
inside the controller to secure it.<br />
4) Clamp the connecting wire for louver motor<br />
and the wire for wireless receiver provided<br />
with the indoor unit to the positions on the<br />
indoor unit shown at the right and secure with<br />
clamp.<br />
Notes<br />
Air outlet duct<br />
Clamp<br />
Tapping screw<br />
(ø 4 × 16)<br />
Connecting wire<br />
for louver motor<br />
Motor cover<br />
Clamp<br />
Tapping screw<br />
(ø 4 × 10)<br />
Controller<br />
Wireless receiver (provided with the indoor unit)<br />
●<br />
When receiver unit is mounted to wall<br />
s Exterior drawing<br />
70 7.5 45<br />
28<br />
Cross-section<br />
Unit: mm<br />
Plug plate<br />
120<br />
68.5<br />
RUN<br />
TIMER<br />
103<br />
Wireless<br />
receiver<br />
Recessed box<br />
Mounting box<br />
s Mounting drawing<br />
Plug plate for three outlets<br />
(Procured by customer)<br />
Screws for mounting box<br />
(Provided with recessed box)<br />
Wireless receiver<br />
Mounting box<br />
Recessed box<br />
(Procured by customer)<br />
Caulking<br />
160