Linkage Sprayers Product Information (13176 Kb) - Fatcow
Linkage Sprayers Product Information (13176 Kb) - Fatcow
Linkage Sprayers Product Information (13176 Kb) - Fatcow
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Centrifugal Pumps<br />
NEW<br />
FMC-150FS-HYD-206<br />
FMC-75-HYD-206<br />
Banjo 200PHY<br />
NEW<br />
FMC-150-HYD-206<br />
FMC-650F-HYD<br />
SHUB55H<br />
Banjo and ACE Models<br />
ORDER CODE DESCRIPTION $ (EX. GST) $ (INC. GST) PROD. CAT.<br />
FMC-150-HYD-206<br />
Suction 1½” discharge 1¼”. For use on pressure compensating closed centre and load sensing or pressure flow<br />
compensating closed centre systems, open-centre systems from 26 to 60 L/min. Integral needle valve bypasses<br />
up to 34 L/min on open-centre systems. Standard Viton ® Carbon/Ceramic seal. Chemical Resistant Valox ® Impeller.<br />
1,591.82 1,751.00 X<br />
Stainless steel shaft and wear ring. Hypro equivalent = 9303-HM2C and HM4C<br />
FMC-75-HYD-206<br />
The ideal pump for the economical set-up of liquid fertiliser units. 1” suction, ¾ discharge. Maximum flow of<br />
86 L/min, maximum pressure of 100 psi. Stainless steel internal hardware. Standard Viton/carbon/ceramic seal.<br />
965.00 1,061.50 X<br />
All poly construction on liquid side<br />
FMC-650F-HYD<br />
E-coated cast iron centrifugal pump for high flow and pressure. Hydraulic drive (55 L/min) motor. Inlet is 220 full port<br />
flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow 650 L/min, max pressure 120 psi (11 bar)<br />
1,575.00 1,732.50 X<br />
FMC-150FS-<br />
HYD-206<br />
200PHY<br />
SHUB55H<br />
316 stainless steel centrifugal pump ideal for use with liquid fertilisers. Hydraulic drive (27 L/min) motor with<br />
integrated needle valve. Inlet is 220 full port flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow<br />
550 L/min, max pressure 160 psi (8 bar)<br />
Banjo 2” polypropylene hydraulic-drive centrifugal pump. Minimum hydraulic flow required = 23 L/min (maximum<br />
38 L/min) suits open or closed systems. 580 L/min liquid flow at 3450rpm at 1 bar pressure<br />
Honda GX160 powered Onga firefighter pump. Also suitable for tank filling, water transfer and some irrigation<br />
situations. Industrial grade nylon impeller, powder-coated high-grade alloy pump casing, 3-way discharge outlets,<br />
close coupled direct engine drive, large carry handle and light weight. Large 1½” priming port for quick prime and<br />
flow rate from 100 to 500 L/min depending on required pressure (in the 2–5 bar range). Note – price for pump<br />
unit only<br />
1,835.00 2,018.50 X<br />
2,885.45 3,174.00 X<br />
1,199.00 1,318.90 X<br />
RoGator Self Propelled sprayer<br />
Photos are for illustrative purposes only. Prices and specifications are subject to change<br />
without notice. Prices effective January 2013. For indicative freight prices, see page 103. 33<br />
Optima BUYERS’ GUIDE – JANUARY 2013