Linkage Sprayers Product Information (13176 Kb) - Fatcow

Electronic Monitors and
spray-rate controllers
MT01022
MT01000
NEW
MTSMATE-ARAG3
NEW
MT01425
A46714221-Kit
A4670610
A4626405
ORDER CODE DESCRIPTION $ (EX. GST) $ (INC. GST) PROD. CAT.
MT01000
Calc-an-acre II area/speed/pump speed/distance meter. Ideal for fitting to any implement or vehicle where a record
of area covered, travel speed or distance measurement is required. Liquid crystal backlit display for day/night use.
737.65 811.41 Y
Can store up to 3 separate areas at once
MT01022
FlowTrak II spray monitor. Records distance, area and litres used and can display speed, pump speed, flow rate and
calculated litres per hectare spray rate. Ideal for greatly improving the accuracy of spraying and recording areas
2,369.23 2,606.15 Y
covered and liquid used. Comes with a flowmeter and all hardware to fit as a kit. Can operate in batch mode
MTSMATE
Spraymate II auto-rate spray controller. Fully automatic spray rate controller for fitting to a sprayer that has existing
electric solenoids or 3-wire motorised valves fitted. Capable of up to 3-section boom control, this compact controller
can show area, speed, flow rate, litres per hectare, total liquid used and area per hour. The memory records area,
2,438.01 2,681.81 X
distance and liquid used. Comes with full kit
MTSMATE-ARAG3
Spraymate 3-section auto rate controller complete with all wiring looms, hardware, a rapid-check flowmeter and
3 motorised boom-section valves for fitting to an existing boomsprayer as an upgrade for manual or basic electric
controls. This kit comes with all the components for a complete upgrade. The controller console displays litres per 4,187.11 4,605.82 X
hectare (application rate) or any other function selected by the rotary selector, and can record area, liquid pumped
and distance travelled. Ideal for older sprayers that require upgrading. Suitable for applications up to 20 bar pressure
MT01425
GPS speed sensor for fitting to MicroTrak auto-rate controllers in place of the older style wheel sensors and magnets.
This useful receiver is a 5 hertz system suitable for a full travel speed range
617.53 679.28 Y
A46714221-KIT
The Bravo 140 controller is a cost-effective unit for orchard or vine spraying utilising 2 ultrasound sensors for
automated switching on and off of 2 solenoids where required. Displayable data on the 140 includes: speed, applied
area, number of sprayed trees, status of sensors. The speed of shut off is automatically adjusted for speed changes
within a range. The Bravo 140 kit comes with a 2 metre power cable, 6 metre sensor cable, 4.5 metre valve block
3,795.00 4,174.50 X
cable, 2 sensors complete with connector cable and a speed sensor with connecting cable. Note – solenoids and
fittings need to be ordered separately. See page 75 for more information on solenoid shut-off options
A4670610
The Visio is an innovative multi-function viewer for use with a variety of sensors utilising selectable software to
detect inputs such as pressure, flow, and speed. It can output such data as area, L/ha, flow rate, litres used and
pressure in bar. To access this information for the job you have in mind, select from the sensor and/or equipment
385.00 423.50 X
listed below. A more detailed layout option is available from Croplands
A4670610.100
Single connector cable for 1 sensor – must be used for connecting the Visio with speed, pressure or RPM’s (add
sensor for task required)
42.00 46.20 X
A4670610.110
Twin connector cable for 2 sensors – for use with combination of 2 sensors such as speed and flow, or pressure and
tank level. (Add sensors for task required)
46.00 50.60 X
A4670610.120
Connection cable for single sensor and 453 ball valve. If flowmeter is added this combination can be used for a filling
pump valve stop kit
104.00 114.40 X
A4670610.130 Pump stop kit cable/relay box. Would require a wolf flowmeter and pump motor that has electronic output/input 112.00 123.20 X
A466113.004
Level sensor – for use with Visio and A4670610.110 cable. Level sensor would need to be fitted to tank. .4–20mA
signal, ¼” BSP male connection, 1m cable
690.00 759.00 X
A467100.086 Speed sensor for use with appropriate connecting cable and Visio 159.00 174.90 X
A466113.200 20 bar pressure sensor for use with appropriate connecting cable and Visio 275.00 302.50 X
A4626405 Wolf flowmeter for use with Visio. 10–200 L/min range. Utilises T5 connectors 412.00 453.20 Y
EPRO-ARAG5
Envizio Pro II GPS Guidance with Can switch box providing integrated spray rate controller with automatic boom
switching. Complete with all wiring looms, hardware, flowmeter and 5 motorised boom-section valves for fitting to
an existing boomsprayer as an upgrade for manual or basic electric controls. This kit comes with all the components 13,450.00 14,795.00 X
for a complete upgrade. All in one GPS system and spray one controller using 1 main screen, includes Helix antenna
E-Diff correction and switch box
For more information on what the Visio can connect to, and what will be required to order in the way of hardware, please contact Croplands on NZ 0800 10 68 98 and
AU 1800 999 162, or log on to www.croplands.com.au and download the Visio technical support information.
Photos are for illustrative purposes only. Prices and specifications are subject to change
without notice. Prices effective January 2013. For indicative freight prices, see page 103. 73
Optima BUYERS’ GUIDE – JANUARY 2013