Linkage Sprayers Product Information (13176 Kb) - Fatcow

Flojet pumpS
UP-119B-KIT
Diaphragm
Valve
Pressure switch
FL4300-143 pump
A309B53
A908006 gauge
A9620050 regulator
A309953
A309B53
A typical Flojet pump fitted with A309B53 filter and
A9620050/A908006 PRV+ gauge
Flojet Pump accessories and parts
Diaphragms, Valves and Pressure Switches
DIAPHRAGM VALVE Pressure Switch
PUMP MODEL PART NO. $ (EX. GST) $ (Inc. GST) PART NO. $ (Ex. GST) $ (Inc. GST) PART NO. $ (EX. GST) $ (INC. GST) PROD CAT
FL2100-232 FL21010-004 40.53 44.58 FL20914-003 28.53 31.38 FL2095-100 71.72 78.89 Y
FL2130-132 FL21010-103 33.22 36.54 FL20028-053 38.08 41.89 FL02095-115 71.72 78.89 Y
FL3811-133 Pump head only available fl20407-022 61.81 67.99 fl02091-150 103.78 114.15 Y
FL3501-506 FL20419-012 102.94 113.23 FL20407-033 62.55 68.80 FL02091-060 91.56 100.72 Y
FL4300-143 FL20403-040 36.19 39.81 fl20407-020 79.03 86.93 FL02095-103 86.98 95.67 y
FL3521-139 FL20419-015 102.94 113.23 FL20407-021 66.61 73.27 FL02091-060 91.56 100.72 Y
FL7300-142A FL20407-720 – – fl20407-720 101.54 111.69 fl02090-780 70.50 77.55 Y
Flojet Pump Filter Options
ORDER CODE DESCRIPTION $ (EX. GST) $ (INC. GST) PROD. CAT.
A309953
Suction filter, with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” inlet, so a ³∕8” to ½”
reducing nipple (A2402021) is required to fit this filter. Outlet tail from filter is 13mm
19.00 20.90 Z
A2402021 ³∕8” to ½” reducing nipple 3.49 3.84 Y
A309B53 Suction filter, with bayonet coupling to connect to 43 series Flojet pumps. Outlet tail from filter is 13mm 19.00 20.90 Z
UP-119B-KIT Handy on/off switch and loom kit for Flojet pumps (or similar models) 39.95 43.95 Y
Flojet Pump Regulator Kits
ORDER CODE DESCRIPTION $ (EX. GST) $ (INC. GST) PROD. CAT.
A9620050
Regulator with bayonet fitting for direct coupling to the outlet of 43 series Flojet pumps to regulate pressure and flow.
Regulator has a bypass to tank or suction line. ½” male threaded outlet. Order gauge separately
27.82 30.60 Y
A9620090
Regulator with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” outlet, so a ³∕8” to ½”
reducing nipple (A2402021) is required to fit this regulator. Regulator has a bypass to tank or suction line. ½” male
27.82 30.60 Y
threaded outlet. Order gauge separately
A908006 0–6 bar glycerine filled pressure gauge to suit regulators above 29.45 32.40 Y
36
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change
without notice. Prices effective January 2013. For indicative freight prices, see page 103.