installation and operation manual - Philips Lighting Controls

INSTALLATION AND OPERATION COMPLI SCENIST II 12PROGRAMMING (Continued)Automatic Cycling ModeTo AccessHold down the PROGRAMPress FADE RATE DOWNIndication on Fade Rate DisplayDESCRIPTIONThis feature allows a Compli Scenist II to automatically sequence from scene to scene.If set, the first five presets (ON,A,B,C,D) will cycle automatically.When PRESET B is finished PRESET C will start and so on.When the fade is complete it will move to the next scene at the scenes “fade rate”.This can be used for store windows, sculpture lighting or even fountain control.ProgramPress PRESET B (second row, right) to enable/disable.The PRESET B will illuminate if enabled.ExitSET will return to normal operation.EXAMPLEEnable Fully Automatic1. Hold PROGRAM and press FADE RATE DOWN2. Press PRESET B3. Press SET