Parts Sheet - Tolomatic

16 – Switches RSA32/RSM32Parts Sheet #3600-4104_16_RSA32psNOTE: For actuators manufacturedbefore 5-1-2010Part Number Ordering Config. Code OrderingNo Mounting Hardware or FE conn. included Mounting Hardware & FE conn. includeditem Part NO. Description Code3600-9084 Switch Only, Reed, Form C, 5m BT3600-9085 Switch Only, Reed, Form C, Male Conn. BM3600-9082 Switch Only, Reed, Form A, 5m RT3600-9083 Switch Only, Reed, Form A, Male Conn. RM3600-9086 Switch Only, Triac, 5m CT3600-9087 Switch Only, Triac, Male Conn. CM3600-9090 Switch Only, Hall-effect, Sinking, 5m KT3600-9091 Switch Only, Hall-effect, Sinking, Male Conn. KM3600-9088 Switch Only, Hall-effect, Sourcing, 5m TT3600-9089 Switch Only, Hall-effect, Sourcing, Male Conn. TM2503-1025 Connector (Female) 5 meter leadNOTE: When ordered by Config. Code Female connector & all mounting hardware is includedREED SWITCHESNOTE: Form A Reed Switches should not be used in TTL logiccircuits. A voltage drop caused by the L.E.D. indicator will result.Forapplications where TTL circuits are used, please contact Tolomatic.WARNING: An ohmmeter is recommended for testing ReedSwitches. NEVER use an incandescent light bulb as a high currentrush may damage the switch.Reed and TRIAC switches are only recommended for signallingposition, not directly powering soleniods. For shifting a solenoid, arelay or resistor is recommended between it and the switch. Switchratings must not be exceeded at any timeTO ORDER RETROFIT KITS: SW (then the model number and basesize, and code for type of switch needed: EXAMPLE: SWRSA32RTAll Switch Kits come with 1 switch and mounting hardware.Hardware Only Kits are available:RSA32, RSM32 - 2503-1034Universal Switch Wiring Diagrams and Label Color Coding(+)(-)OR(+)(-)LOADLOADBROWN(+)BLUE(-)BROWN(+)BLUE(-)REEDSWITCHREEDSWITCHREED SWITCH FORM ALABEL COLOR: RED10VA MAX.200 Vdc500mA Max. CurrentHALL-EFFECTSOURCINGSWITCHBROWN (+)BLACKBLUE(-)(+)HALL-EFFECT SWITCH(SOURCING)LABEL COLOR: WHITEInput Voltage:5-25 VDC onlyOutput Current: 200 mA Max.(-)LOADCOMMONNORMALLY CLOSEDNORMALLY OPENBROWNBLACKBLUEREEDSWITCHREED SWITCH FORM CLABEL COLOR: YELLOW120 Vdc/120 Vac MAX.250mA Max. CurrentHALL-EFFECTSINKINGSWITCHBROWN (+)BLACKBLUE(-)(+)(-)LOADHALL-EFFECT SWITCH(SINKING)LABEL COLOR: GREENInput Voltage:5-25 VDC onlyOutput Current: 200 mA Max.120VacMax.BLUEMOVTRIACSWITCHBROWNQUICK-DISCONNECT (Applies to all switch types)BLUEBROWNBLACKACCOMLOADINPUTTRIAC SWITCHLABEL COLOR: BLUEMax. 1Amp. Cont. Current @ 86°FMax. .5Amp. Cont. Current @ 140°FPeak surge current 10 Amp.An Important Note Regarding Field Retrofit ofQuick-Disconnect Couplers:If replacing a Quick-Disconnect switch manufacturedbefore 7-1-97 it will also be necessary toreplace or rewire the female-end coupler with thein-line splice2503-1025 Female Connector 5MNOTE: The side of the switch with thegroove indicates the sensing surface.This must face toward the magnet.For complete Reed and TRIAC Switch Performance Data, referto the Tolomatic Electric Products Catalog #3600-4609.3800 County Road 116, Hamel, MN 55340http://www.Tolomatic.com • Email: Help@Tolomatic.comSOURCINGPhone: (763) 478-8000 • Fax: (763) 478-8080 • Toll Free: 1-800-328-2174© 2011 Tolomatic 201102031137HALL-EFFECTSWITCHBROWN (+)BLACKBLUE(-)(+)8(-)Information furnished is believed to be accurateand reliable. However, Tolomatic assumes noresponsibility for its use or for any errors thatmay appear in this document. Tolomatic reservesthe right to change the design or operation of theequipment described herein and any associatedmotion products without notice. Information inthis document is subject to change without notice.LOAD