Full report Pub3851 - USITC

Appendix B7013.39.10 7013.49.107013.39.20 7013.49.207013.39.30 7013.49.307013.39.40 7013.49.407013.39.50 7013.49.507013.39.60 7013.49.60CHAPTER 7171-1. Note 9 to chapter 71 is superseded by the following:“9. For the purposes of heading 7113, the expression "articles of jewelry" means:(a)(b)Any small objects of personal adornment (for example, rings, bracelets, necklaces, brooches, earrings, watch chains,fobs, pendants, tie pins, cuff links, dress studs, religious or other medals and insignia); andArticles of personal use of a kind normally carried in the pocket, in the handbag or on the person (for example, cigaror cigarette cases, snuff boxes, cachou or pill boxes, powder boxes, chain purses or prayer beads).These articles may be combined or set, for example, with natural or cultured pearls, precious or semiprecious stones,synthetic or reconstructed precious or semiprecious stones, tortoise shell, mother-of-pearl, ivory, natural or reconstitutedamber, jet or coral.”CHAPTER 7272-1. Subheading 7225.20.00 is deleted and subheadings 7225.30 through 7225.50.80 are supersededby the following:[Flat-rolled products ...:]“7225.30 Other, not further worked than hot-rolled, in coils:Of a thickness of 4.75 mm or more:7225.30.11 Of tool steel ..................... Free 29%7225.30.30 Other .......................... Free 28%Of a thickness of less than 4.75 mm:7225.30.51 Of tool steel ..................... Free 29%7225.30.70 Other .......................... Free 28%7225.40 Other, not further worked than hot-rolled,not in coils:Of a thickness of 4.75 mm or more:7225.40.11 Of tool steel ..................... Free 29%7225.40.30 Other .......................... Free 28%Of a thickness of less than 4.75 mm:7225.40.51 Of tool steel ..................... Free 29%7225.40.70 Other .......................... Free 28%7225.50 Other, not further worked than cold-rolled(cold-reduced):7225.50.11 Of tool steel ........................ Free 29%Other:7225.50.60 Of a thickness of 4.75 mm or more . . . Free 28%Of a thickness of less than 4.75 mm:7225.50.70 Heat-resisting steel ........... Free 29%7225.50.80 Other ...................... Free 28%”B-90