Full report Pub3851 - USITC

Appendix B84-26. Subheadings 8462.21 through 8462.29.80 are superseded by the following:[Machine tools (including presses) for working ...:][Bending, folding, straightening or flattening...:]“8462.21.00 Numerically controlled ................ 4.4% Free (A,AU,CA,CL, 30%E,IL,J,JO,MA,MX,P,SG)8462.29.00 Other .............................. 4.4% Free (A,AU,CA,CL, 30%”E,IL,J,JO,MA,MX,P,SG)84-27. Heading 8464 and subheadings 8464.10.00 through 8464.90.90 are superseded by the following:“8464 Machine tools for working stone, ceramics,concrete, asbestos-cement or like mineralmaterials or for cold working glass:8464.10.01 Sawing machines ........................ Free 35%8464.20.01 Grinding or polishing machines ............. 2% Free (A,AU,CA,CL, 35%E,IL,J,JO,MA,MX,P,SG)8464.90.01 Other .................................. 2% Free (A,AU,CA,CL, 35%”E,IL,J,JO,MA,MX,P,SG)84-28. Subheadings 8465.99 through 8465.99.80 are superseded by the following:[Machine tools (including machines for nailing...:][Other:]“8465.99.01 Other .............................. 2.4% Free (A,AU,CA,CL, 35%”E,IL,J,JO,MA,MX,P,SG)84-29. Subheadings 8466.10 through 8466.10.80 are superseded by the following:[Parts and accessories suitable for use solely...:]“8466.10.01 Tool holders and self-opening dieheads: ...... 3.9% Free (A,AU,CA,CL,E, 45%”IL,J,JO,MA,MX,P,SG)84-30. Subheading 8466.20.40 is deleted.84-31. Subheadings 8466.30.45 through 8466.30.80 and the superior text immediately precedingsubheading 8466.30.45 are superseded by the following:[Parts and accessories suitable for use solely...:][Dividing heads and other special attachments...:]Other special attachments:“8466.30.60 Machines ....................... 2.9% Free(A,AU,CA,CL,E, 35%IL,J,JO,MA,MX,P,SG)8466.30.80 Other .......................... 8% Free(A,AU,CA,CL,E, 35%”IL,J,JO,MA,MX,P,SG)84-32. Subheading 8466.93.47 is deleted.B-105