UP LS2 LS3 L99 w/4L65E 4L70E 4L80E 4L85E Fuel Injection ...

NOTE: Don’t forget about the inline fuse or circuit breaker that should be installedbetween the battery positive cable and the red 4 gauge charge wire you are about toconnect in this next step. Without this protection, should the charge wire short toground, your vehicle could possibly deconstruct itself through the use of fire.With the starter installed to the engine, route the 4 gauge red wire to the high Amp fuseor circuit breaker. As you can see in the diagram below you will then have to route a 4gauge wire from the other side of the circuit breaker or fuse over to the battery terminalon the starter or directly to the positive post on the battery. This jumper wire andterminals are not included in this wiring kit. You will need to visit your local auto partsstore to purchase them.Then route the 14 gauge purple wire to the start/crank terminal on the starter. Makesure your routing strategy takes into consideration any clearance required between itand your headers. See the diagram below for more information.24