User Manual - Unical Lattner Condensing Hot Water Boilers

Operating instructionsTurn the rotary knob (F) to change the value.Turn the rotary knob (F) until the HOLIDAY level is displayed.Press the programming key (C) again (the red Change Led(D) will remain illuminated) to save the adjustment and passon to changing the successive value.Press the programming key (C), the red Change Led will beilluminated (D); at this point it is possible to proceed andchange the values.In the TIME-DATE level it is possible to change, following thesteps previously described, these values:minutes>time>year>month>dayTurn the rotary knob (F) to change the value.To return to the superior level DATE/TIME turn the rotary knob(F) until RETURN is viewed on the display, therefore press theprogramming key (C).Press the programming key (C) again (the red Change Led(D) will remain illuminated) to save the adjustment and passon to changing the successive value.HOLIDAY SETTINGOpen the E8 heating controller’s display cover.Turn the rotary knob (F) until the triangle “ selected level “ (I) ispositioned on DATE/TIME/HOLIDAYIn the HOLIDAY level it is possible to change, following thesteps previously described, these values:STARTYEAR>START MONTH>START DAY>STOP YEAR>STOPMONTH>STOP DAYAssistenz aData/Ora/FerieVisualiz zareUtenteProgr. TempoTecnic oImpiantoAcqua sanitariaCircuito riscaldamento ICircuito riscaldamento IISolarTo return to the superior level DATE/TIME turn the rotary knob(F) until RETURN is viewed on the display, then press theprogramming key (C).Press the programming key (C), the TIME-DATE level will bedisplayed.10